D-Link Blog Home

The Zipit Wireless Messenger is a small clamshell device originally produced by Aeronix, which is now under the spin-off Zipit Wireless, Inc., that enables Instant Messaging (AOL Instant Messenger, Yahoo! Messenger, MSN Messenger).

ZipIt is a Macintosh program that compresses and uncompresses files in the “zip format”. The zip format is popular on the IBM and on other platforms, such as Unix. You can tell if a file is in zip format simply by examining its name: if it ends in ‘.zip’, it is a zip file. (Note that if it ends in ‘.Z’ or ‘.gz’, it is NOT a zip file. The former belongs to a program called Compress, and the latter to a program called GZip.)

The zip format is most useful when compressing files destined for another computer platform, such as the IBM, or for uncompressing zip files received from other platforms. ZipIt can create zip archives intended solely for the Macintosh, but the zip format is not a standard compression format on the Mac.

Tags: Zipit, Zipit Wireless

The D-Link 4-Port Broadband Router been discontinued as of May 01, 2007 in the US.Many people are looking for DI-604 Firmware Download.

DI-604 Firmware Download:

site: ftp://ftp.dlink.com/Gateway/di604_revE1/Firmware/di604_revE_firmware_353.bin

Version:3.53

Date:4/24/2007

Revision Info:

¤ Updated DDNS screen and request.
¤ Updated PPPoE WAN settings.
¤ Applied minor Grammar corrections

1.How to upgrade the firmware on DI-604?

Step 1: Download the latest firmware.

Step 2: Once you´ve downloaded the firmware, open a web browser such as Internet Explorer or Netscape and enter the IP address of your router (192.168.0.1).

Step 3: Enter your username (admin) and your password (leave the field blank). Click OK to enter the web configuration for the device.

Step 4: Click on the Tools tab and then the Firmware button on the left side. Click on the Browse button and browse to the .bin (or .dlf) file you downloaded in Step 1. Highlight the file by clicking on it once and click Open.

Step 5: Click Apply. It may take a up to 30 seconds for the upgrade to complete. Click on the Continue button. The firmware is now upgraded.

Step 6: If you get a Page cannot be displayed or similar error after clicking Continue, close your browser and re-open it. Enter 192.168.0.1 and press Enter. You should now be prompted for your username (admin) and your password (leave blank).

2.How to upgrade the firmware on the D-Link DI-604 and the DI-614+ using a Macintosh computer?

Step 1. Create a Folder on the Desktop Screen:
From a blank spot the Desktop Screen, press and hold the Control key on the keyboard and click the mouse button. Release the Control key, click New Folder, and name it firmware.

Step 2. Retrieve Firmware from Website:
Click link below and download file to the folder created in step 1.

Step 3. Upgrade the Firmware:
A. From the Main Desktop Screen, launch Internet Explorer or Netscape.

B. Type 192.168.0.1 in the Address bar and click Go.

C. For the User ID, type admin and click OK.

D. Click Tools on the top and then click Firmware on the left side.

E. Click Browse>Desktop>firmware, double click di6xx_firmware_203.bin and click Apply. Wait for approx. 15 seconds or until the M2 light stops flashing on the DI-6xx unit then click Continue.

F. This takes you back to the Tools page. Check the Current Firmware Version on the Tools page to confirm that the firmware loaded successfully.

Tags: DI-604, Firmware, upgrade Firmware

Step 1: Open your web browser and type the IP address of the access point in the address bar. The default IP address is 192.168.0.50. At the login, enter your username (admin) and password (default password is blank),D-Link DWL-7100 As a Example

Step 2: Click the Advanced tab and then click Mac Filters on the left side.

Step 3: Next to Access Control, select the mode you would like to use from the drop-down menu.

• Disabled – Disables this feature and will allow all wireless clients to connect.
• Accept – Blocks all clients except for what you enter in the list.
• Reject – Allows all clients except for what you enter in the list.

Step 4 Enter the Ethernet MAC address that you wish to Accept or Reject.

Step 5 Click Apply and then click Continue to save your settings.

Tags: DWL-2100AP, DWL-7100, MAC filtering

In computer networking, MAC Filtering (or EUI filtering, or layer 2 address filtering) refers to a security access control methodology whereby the 48-bit address assigned to each network card is used to determine access to the network.

MAC filter can filter each computer through MAC address in LAN; can also bind one MAC address with a static IP address. Following shows a [MAC Filter Config] dialog:

MAC addresses are uniquely assigned to each card, so using MAC filtering on a network permits and denies network access to specific devices through the use of blacklists and whitelists. While the restriction of network access through the use of lists is straightforward, an individual person is not identified by a MAC address, rather a device only, so an authorized person will need to have a whitelist entry for each device that he or she would use to access the network.

While giving a wireless network some additional protection, MAC Filtering can be circumvented by scanning a valid MAC (via airodump-ng) and then changing the own MAC into a validated one. This can be done in the Windows Registry or by using commandline tools on a Linux platform.

Tags: mac addresses, MAC filtering, wireless network

DCS-1000

DCS-1000, CD, AC Power Adapter, Mounting Bracket, QIG, CD (Manual, QIG, IPView, Setup Wizard), Ethernet Cable

DCS-1000W

DCS-1000W , 2 Antennas, AC Power Adapter, Stand/Mounting Bracket, QIG, Ethernet Cable, CD(Manual, QIG, IPView, Setup Wizard)

DCS-1110

DCS-1110 device, Master CD with manual and software, QIG, 2.0dBm antenna, 5V 2.5A switching power adapter, Cat.5 RJ-45 cable, Stand and Mounting Bracket.

DCS-2000

DCS-2000, AC Power Adapter, CD (Drivers, Software, QIG, Manual), Camera Stand and Bracket, Ethernet Cable

DCS-2100+

DCS-2100+, Stand, CD, Manual,QIG, 2 Antennas, Bracket

DCS-2100G

DCS-2100G device, Master CD with manual, software, QIG, 5V 2A switching power adapter, Cat.5 RJ-45 cable, Stand and Mounting Bracket.

DCS-2120

DCS-2120 device, Master CD with manual software, QIG, 2.0dBm antenna, 5V 2.0A switching power adapter, Cat.5 RJ-45 cable, Stand and Mounting Bracket.

DCS-30

Enclosure

DCS-3220

DCS-3220 Device, CD with manual, QIG, 12V 1.5A Switching Power Adapter, Cat.5 RJ-45 Cable, Mounting Bracket.

DCS-3220G

DCS-3220G Device, CD with manual, QIG, 12v 1.5A Switching Power Adapter, Cat.5 RJ-45 Cable, 2.0 dBm Antenna, Mounting Bracket.

DCS-3420

DCS-3420 Device, Switching power adapter, Bracket, Antenna.

DCS-40

Enclosure, Bracket

DCS-45

Housing, Screws for housing, Cable Glands, Bracket, Screws for bracket

DCS-50

Camera Enclosure, Bracket

DCS-5220

DCS-5220 device, Master CD with Manual and Software, CAT-5 RJ-45 Cable, Mounting Kit, Power Adapter, Antenna, QIG.

DCS-5300

DCS-5300 device, 12V/1.5A Power Adapter, CAT5 Ethernet Cable, QIG, Master CD, A/V Cable, Remote Control, Stand

DCS-5300G

DCS-5300G Device, CD with manual, QIG, 12v 1.5A Switching Power Adapter, Cat.5 RJ-45 Cable, 2.0 dBm Antenna, AV Cable, Remote Control, Stand and Mounting Bracket

DCS-5300W

DCS-5300W Camera, 12V/1.5A Power Adapter, CAT5 Ethernet Cable, QIG, Master CD, A/V Cable, Remote Control, Stand

DCS-60

Camera Enclosure, Bracket

DCS-6620

DCS-6620 Device, Master CD with manual, software, QIG, 12V 1.5A switching power adapter, Cat.5 RJ-45 cable, Stand and Mounting Bracket Remote Control

DCS-6620G

DCS-6620G device, Master CD with manual, software, QIG, 2.0dBm antenna, 12V 1.5A switching power adapter, Cat.5 RJ-45 cable, Stand and Mounting Bracket, Remote Control

DCS-70

Camera Enclosure, Bracket

DCS-900

DCS-900 Internet Camera, Software in CD-ROM, QIG, Power Adapter(DC5V), Stand, Ethernet Cable

DCS-900W

DCS-910

DCS-910 device, Master CD with manual, software, QIG, 2.0dBm antenna, 5V 5.5A switching power adapter, Cat.5 RJ-45 cable, Stand and Mounting Bracket

DCS-900W Internet Camera, Power Adapter, QIG, CD-ROM, Ethernet Cable, Antenna, Swivel Stand

DCS-950

DCS-950 Device, Master CD with manual & software, QIG, 5V 2.5A switching power adapter, Cat.5 RJ-45 cable, Stand and Mounting Bracket.

DCS-950G

DCS-950G Device, Master CD with manual & software, QIG, 2.0dBm Antenna, 5V 2.5A Switching Power Adapter, Cat.5 RJ-45 Cable, Stand and Mounting Bracket.

DCS-G900

DCS-G900 device, Master CD with manual & software, QIG, 2.0dBm antenna, 5V 2.5A switching power adapter, Cat.5 RJ-45 cable, Stand and Mounting Bracket.

DCS-920

DCS-920 device, Master CD with manual, software, QIG, 2.0dBm antenna, 5V 5.5A switching power adapter, Cat.5 RJ-45 cable, Stand and Mounting Bracket

DCS-910

DCS-910 device, Master CD with manual, software, QIG, 2.0dBm antenna, 5V 5.5A switching power adapter, Cat.5 RJ-45 cable, Stand and Mounting Bracket

DCS-5610

DCS-5610 device, Master CD with manual, software, QIG, 12V 1.5A switching power adapter, Cat.5 RJ-45 cable, Stand and Mounting Bracket

DCS-6110

DCS-6110 device, Master CD with manual, software, QIG, 12V 1.5A switching power adapter, Cat.5 RJ-45 cable, Dome Enclosure, Ring Enclosure, Screwdriver, Screws and I/O Connector

DCS-3410

DCS-3410 device, Master CD with manual, software, QIG, 12V 1.5A switching power adapter, Cat.5 RJ-45 cable, Stand and Mounting Bracket

DCS-3415

DCS-3415 device, Master CD with manual, software, QIG, 12V 1.5A switching power adapter, Cat.5 RJ-45 cable, Stand and Mounting Bracket

Tags: camera, DCS, DCS-3220, Package Contents