Oct 31

Make sure you have downloaded the D-Link “mydlink Baby Camera Monitor” app from the Apple App store or Google Play App store depending on your device.

The Wi-Fi network name and password are located on the label on the back of the camera and also on back of the quick installation guide.

Follow the steps to get started:

Step 1. Open the Wi-Fi configuration setting of your device:

iPhone/iPad: Settings > Wi-Fi Settings
Android: Settings > Wireless & Networks > Wi-Fi Settings

A10684_image1

Step 2. Look for the camera’s SSID on the list of available networks and touch to select it.

Step 3. Launch the “mydlink Baby Camera Monitor” app. The app will guide you through the configuration process*.

A10684_image2

* If you need help with the rest of the configuration, please come back to our online resources.

Tags: , ,

Oct 31

How do I configure my Mac OS X computer to connect to a L2TP over IPsec Tunnel on my DFL Series Firewall?

Step 1: Please open the Internet Connect Utility, it can be found at Applications->Internet Connect.

A10521_image1

Step 2: Please choose VPN (L2TP) then choose Configuration->Edit Configurations..

A10521_image2

Step 3: Fill in Authentication details, Click OK when finished.

A10521_image3

Click Connect, you should now be connected to your VPN.

Tags: , , ,

Oct 30

Issue:Java not load when trying to view D-Link camera through the mydlink portal in Mac OS 10.7

A10128_image1

Solution:

Please make sure that you have Java Applet enable on your MAC. To check please follow the steps below:

Step 1: Click on Go and then Utilities

A10128_image2

Step 2: Click on Java Preferences.

A10128_image3

Step 3: Select Enable Applet Plug-in and Web Start Application

A10128_image4

Tags: , , ,

Oct 30

Step 1: The D-Link DWC-1000 will need to be registered with D-Link. The registration site is http://register.dlink.com.

A10608_image1

Step 2: Once logged into the registration site, click on License Key Activation on the left.

A10608_image2

Step 3: The OBU and Customer fields cannot be changed on the License Activation page. Enter the Serial Number of the DWC-1000 that will have the license. Enter the 20 digit license key into the License Key field. ClickGet Activation Code to complete the registration, and you will receive an email within 24 hours containing your Activation Code.

A10608_image3

Step 4: Log into the setup page of the DWC-1000.

Step 5: Click on the Tools tab, and select License on the left side.

A10608_image4

Step 6: Enter the received key in the Activation Code field. The DWC-1000 will show any applied licenses on this page. The DWC-1000 will support 1 VPN, and up to 3 AP6 licenses.

A10608_image5

Tags: , ,

Oct 29

Step 1: Click the Site Setup button.

Step 2: Input the unit name.

Step 3: Input the IP address.

Step 4: Modify the port if necessary.

Step 5: Input the user name.

Step 6: Input the password.

Step 7: Check the Save Password/ Auto Login option (optional).

Step 8: Click the Test Server button to test the connection between the local application and the remote unit.

Step 9: Click the Add button to add this unit into your remote server list.

Step 10: Click the OK button.

A10166_image2

Note: If using the Multi-NVR program remotely be sure to open port 5150 in your routers firewall for the DNS-726-4. This can be done by creating either port forwarding or virtual server rule.


Set Groups for Cameras

Step 1: Click the Group. tab

Step 2: Log in to all the servers that contain the camera(s) you would like to put into group(s).

Step 3: Click the Insert button to create a new group.

Step 4: Name this group.

Step 5: Highlight the camera(s) that you would like to add into this group and then click the button.

Step 6: Repeat step 4 to establish the group.

Step 7: Repeat step 1 through 6 to establish other groups.

Step 8: Click the OK button.

A10166_image3


Delete/Rename Groups for Cameras

Step 1: Click the Site Setup button.

Step 2: Click the Group tab.

Step 3: Click the group which you would like to modify.

Step 4: Click the Delete or Rename button to remove or rename that group.

Step 5: Repeat step 2 through 3 to modify other groups.

Step 6: Click the OK button.


Setup Remote Live View through Application

Step 1: Click the unit you wish to access in your remote server list.

Step 2: Click the Log In button to access your unit.

Step 3: Select the camera(s) from the camera list on the right, and then drag it to where you wish the image to be displayed.

Tags: ,



 
1 2 3 4 Next
css.php