Apr 02

The Gaming (port forwarding) option allows you to open ports and forward them to an IP address on your LAN.

Step 1 Open a web browser and type the IP address of the D-Link gaming router in the address bar (default is 192.168.0.1). Press Enter.

Step 2 The default password is blank (nothing). Click Log In.

A10361_image1

Step 3 Click Advanced at the top and then click Gaming on the left side.

A10361_image2

Step 4 In the Add Game Rule section select Enable and configure the following:

  • Name – Enter a name to identify the rule or select one using the drop-down list to the right.

A10361_image3

  • IP Address – Enter the IP address of the computer on the LAN that traffic will be forwarded to.
  • TCP Ports to Open – Enter the TCP ports that you want to open
  • UDP Ports to Open – Enter the UDP ports that you want to open
  • Schedule – Select AlwaysA10361_image4

Step 5 Click Save to add the new rule.

Tags: ,

Apr 02

The D-Link DCM-301 DOCSIS™ 3.0 Cable Modem provides high-speed Internet access to the Internet. You can use your cable modem to directly connect one computer in your network to the Internet or connect to a Broadband router to allow multiple devices to share the Internet.

After you install the cable modem, you must contact your cable provider (ISP) and register the MAC address. The MAC address is located on the label on the bottom of the modem.

Below are two common ways to connect your DCM-301 modem to your network.The diagram on the left shows the connection with a broadband router. The diagram on the right shows the connection directly to a computer. Note that the DCM-301 can be placed horizontal or vertical using the included stand (as seen in the diagrams below).

DCM-301

Connecting the Cable Modem (with Router)

Step 1:

Power off your router.

Step 2:

If you are replacing the modem, disconnect all cables and unplug the power to your old modem.

Step 3:

Connect the coaxial cable from your wall to the cable modem’s CATV cable connector. If you plan to have the cable connected to a television as well as the cable modem, you must use a cable line splitter (not included).

Step 4:

Plug the cable modem’s power adapter into a wall outlet or surge protector and into the cable modem’s power port.

Step 5:

Plug one end of the Ethernet cable into the cable modem’s Ethernet port and the other end of the cable into the WAN or Internet port on your router.

Step 6:

In most cases you will have to call your cable company (Internet Provider) and register the MAC address of the D-Link modem. The MAC address is on a label on the bottom of the modem.

Step 7:

When the modem is working properly, the Power, DS, US, Online, and LAN LEDs will all be lit.

Connecting the Cable Modem (without Router)

Step 1:

Power off your computer.

Step 2:

If you are replacing the modem, disconnect all cables and unplug the power to your old modem.

Step 3:

Connect the coaxial cable from your wall to the cable modem’s CATV cable connector. If you plan to have the cable connected to a television as well as the cable modem, you must use a cable line splitter (not included).

Step 4:

Plug the cable modem’s power adapter into a wall outlet or surge protector and into the cable modem’s power port.

Step 5:

Plug one end of the Ethernet cable into the cable modem’s Ethernet port and the other end of the cable into the Ethernet adapter of your computer.

Step 6:

In most cases you will have to call your cable company (Internet Provider) and register the MAC address of the D-Link modem. The MAC address is on a label on the bottom of the modem.

Step 7:

When the modem is working properly, the Power, DS, US, Online, and LAN LEDs will all be lit.

Tags: ,

css.php