Jun 25

1. Click “Download Plug-in” to install mydlink services plug-in for your Firefox. Click Save File button to save the file on your computer.
come_installare_il_plug_in_mydlink_su_firefox0001

 

2. Open Finder, go to Downloads and double click the mydlink services plug-in (Uplayer) to open the application. Click the Open button to install. Click the OK button once completed.
come_installare_il_plug_in_mydlink_su_firefox0002

3. After installing mydlink services plug-in successfully. Please close the browser and Reopen the browser.

4. Go to www.mydlink.com. Trust mydlink website to use mydlink services plug-in (Uplayer). Then you may enjoy mydlink cloud service.
come_installare_il_plug_in_mydlink_su_safari

Applicable to Safari 6 and later version on Mac OS X 10.7 and higher versión.

Tags: , ,

Jun 25

Google have changed Chrome as of version 42. It now disabled Java by default.so you need to re-enable Java,then you can visit mydlink.com.
mydlink_google_chrome_version_4201

When visiting mydlink.com you will see an error:

mydlink_google_chrome_version_4202

To re-enable Java, you will need to go to the following address (chrome://flags/#enable-npapi):

mydlink_google_chrome_version_4203

Click “Enable” to re-enable the Java plugins.

Restart your browser and you will then be able to use Java again.

Tags: ,

Jun 10

This article teaches you how to configure the D-Link GO-RT-N300 wireless network settings.

Step 1 – Open the web browser the IP of the D-Link GO-RT-N300 router (http://192.168.0.1)

gortn300configurewirelessnetworksettings2

Step 2 – In the Username field type Admin
Leave the Password field blank

gortn300configurewirelessnetworksettings3

Step 3 – Click on the Wireless option

gortn300configurewirelessnetworksettings4

Step 4 – In Wireless Basics, you must set the following:

Wireless Network
Enable SSID Broadcast: Enabled
Enable Wireless Isolation: Disabled
Name (SSID): Here you name your wifi network
Mode: 802.11b/g/n
Channel: Auto
Band Width: Auto
Max. Transmission Rate: Auto

Security Options
Security Options: WPA-PSK [TKIP]

Security Options (WPA-PSK)
Pre-Shared Key: This is your wifi password

Save the changes by clicking the “Apply” button

gortn300configurewirelessnetworksettings5

Step 5 – Connecting to a wireless network in Windows 8
• Step 5.1 – To join an existing network, locate the wireless network icon in the taskbar, next to the time display

gortn300configurewirelessnetworksettings6
Wireless Network Icon

• Step 5.2 – Clicking this icon, will show a list of wireless networks that are in range of your computer. Select the network you want by clicking on the name of the network.
gortn300configurewirelessnetworksettings7

• Step 5.3 – You will then be prompted to enter the WPA pre-shared key you entered in Step 4

gortn300configurewirelessnetworksettings8

• Step 5.4 – When you have successfully established a connection to the wireless network, the word “Connected” appears next to the name of the network.

gortn300configurewirelessnetworksettings9

Step 6 – Connecting to a wireless network in Windows 7
• Step 6.1 – To join an existing network, locate the wireless network icon in the taskbar, next to the time display.

gortn300configurewirelessnetworksettings10
Wireless Network Icon

• Step 6.2 – Click on the wireless network (SSID) that you want to connect to and click the Connect button.

gortn300configurewirelessnetworksettings14

• Step 6.3 – You will be prompted to enter the wifi security key.

gortn300configurewirelessnetworksettings15

• Step 6.4 – The following window appears while your computer tries to connect to the router.

gortn300configurewirelessnetworksettings16
• Step 6.5 – When you have successfully established a connection to the wireless network, the word “Connected” appears next to the name of the network.

gortn300configurewirelessnetworksettings17

Tags: ,

Jun 10

This article tell you how to recover the D-Link DSR-250N Wireless Router.

Note: – For the recovery process you will need the following:

• Console cable
• TFTP server
• Firmware – Download the latest version from the www.dlink.com
• PuTTy

Step 1
– Connect the serial port of the D-Link DSR-250N to your PC and an Ethernet cable between the DSR and your network (which is connected your PC)

Step 2 – Open the TFTP server and set the DSR firmware in the root folder.

For example: C: \ Program Files \ Tftpd64
dsr_250n_recovery_process0001

Step 3 – Open PuTTy and configure a COM port with the following: (The COM Port will be showing in Device Manager)

dsr_250n_recovery_process0002

Step 4 -Once configured, click “Open”

Step 5 -Once you see the boot process and the message – Complete the following:

Hit any key to stop autoboot: (“Press any key to stop autoboot”) press the Enter key to enter the bootloader

Step 6 – Enter the following command to set the IP address of the DSR

D-Link DSR-250N bootloader #setenv ipaddr 192.168.1.162

Step 7 -Enter the following command to set the host IP address where the TFTP resides

D-Link DSR-250N bootloader #setenv serverip 192.168.1.168

Step 8 -Enter the following command to set all the TFTP transfer of the LAN ports

D-Link DSR-250N bootloader #setenv ethact octeth0

Step 9 – Copy and paste the following command to overwrite the firmware

D-Link DSR-250N bootloader #setenv firm_flash ‘erase + 0x10080000 0x1d20000; cp.b $ (loadaddr) 0x10080000 0x1d20000’

Step 10 –Enter the following commands to boot firmware

D-Link DSR-250N bootloader #setenv boot_firm ‘0x10080000 cp.b $ (loadaddr) 500000; go 0x4000200’

D-Link DSR-250N bootloader #setenv bootcmd ‘run boot_firm’

Step 11 -Enter the following command to register

D-Link DSR-250N bootloader# saveenv

Step 12 -Enter the following command to transfer the firmware

D-Link DSR-250N bootloader#
 tftp $(loadaddr) DSR-250N_A2_FW2.11_WW

(The full name of the firmware as indicated below)

dsr_250n_recovery_process0003
You should also notice the transfer from TFTP server (if not, make sure the firewall is turned off or an antivirus program does not block)

dsr_250n_recovery_process0004


Step 13
-Enter the following command to flash the firmware

D-Link DSR-250N bootloader# run firm_flash

Step 14
-Enter the following command to run the firmware at boot

D-Link DSR-250N bootloader# run boot_firm

Once the operation is completed, the DSR will ask you to log in again.

DSR-250N login: admin
Password: admin

Tags: , ,

css.php