Sep 29

Step 1: Log into your D-Link DNS-1200-05. The Default username is admin and the password is password

Step 2: Click on System Management and then Network

Step 3: Set your Primary DNS address to point to your Active Directory server

Step 4: Click on Time and Date and set the time and date to match with what your Active Directory servers Time and date settings.

Step 5: Click on Network Services and then on File Sharing and make sure that CIFS is enabled.

Step 6: Click on CIFS and Enter your Active Directory information

Username: <Username of an administrator user and password> e.g. Administrator

Workgroup: The workgroup the AD/Windows server is associated with

Realm Name: <Realm name of AD/Windows Server>

AD Server Name: <Active Directory Server name>

DNS1: <IP of your Active Directory/Windows Server>

Step 7: Click on Apply

The DNS-1200-05 should now successfully be connected to your Active Directory

Step 8: Click on Account management and then click on Users and select Domain users from the drop down menu

Tags: ,

Sep 29

Step 1: Click Start and Click Run, type \\IP of DNS-323 (eg. \\192.168.0.32) and Press OK.

Step 2: Explore the root directory of the DNS-323 (This Example- Volume_1)

Step 3: Create a folder to hold your MP3GÇÖs. (Ex. Shared Mp3GÇÖs)

Step 4: Add MP3s to the folder.

Step 5: Log into the DNS-323. The default username is admin (all lower case) and the default password is blank (nothing). Click on Config.

Step 6: Click on the Advanced tab at the top and then click on iTunes SERVER on the left hand side.

Step 7: Click Enable, Uncheck root and click Browse.

Step 8: Select your created MP3 Directory and press OK.

Step 9: Click Save Settings.

Step 10: Open iTunes, select the DNS-323 on the Left Panel

Tags: ,

Sep 29

This article tells you how to setup an FTP server behind a router on D-Link DNS-321/323/343

Step 1: Log into the ShareCenter configuration and click on the Advanced tab and select FTP Server.

Step 2: Setup you users FTP Server Settings For user access and Save settings.

Step 3: Start the FTP server.


If you are behind a router, you will need to forward the FTP port from the router to the ShareCenter. Additional filtering and firewall settings may need to be modified on your router to allow FTP Access to the ShareCenter from the Internet. Once the port has been forwarded on the routerusers from the internet will access the FTP server through the WAN IP address of the router.

Step 4: Setup Port Forwarding rule.

**If you are using a D-Link router, such as the WBR-2310 or Any DIR Series Router used in the example below, your port forwarding rule should be similar to the following:

Name -Name the ShareCenter FTP server rule.
IP Address -Enter the IP address of the ShareCenter.
Public Port -Enter the public FTP port. By default, the port is 21.
Private Port -Enter the private FTP port. By default, the port is 21.
Traffic -Type Set the traffic type to TCP.

Step 5: Save settings.

If you use an FTP port other than 21, then users accessing the FTP server using an FTP client will have to specify the non-standard port, and users who are using a browser will have to specify the port in the URL (e.g. ftp://ftp.dns323.com:3000).

Tags: , ,

Sep 27

Below are the recommended system requirements for the Nuclias Connect software:

 

Small Scale:

 

  • Maximum Managed APs – up to 100
  • CPU – Intel® Core™ i5 Processors, 3.2 GHz or better
  • RAM – 8GB DDR3 or higher
  • Storage – 2TB
  • Monitor Resolution – 1080P or better
  • Supported OS – Windows 10 Pro (64-bit) / Server 2016 (64-bit) / CentOS7 / Ubuntu Cosmic 18.10 / Bionic 18.04 (LTS) / Xenial 16.04 (LTS)
  • Recommented Web Browser – Edge, Chrome, or Safari (latest versions)
  • Recommended Uplink Bandwidth – At least 10Mbps

 


Large Scale

 

  • Maximum Managed APs – up to 1000
  • CPU – 8th Generation Intel® Core™, i7 Processors or better
  • RAM – 16GB DDR3 or higher
  • Storage – 4TB
  • Monitor Resolution – 1080P or better
  • Supported OS – Windows 10 Pro (64-bit) / Server 2016 (64-bit) / CentOS7 / Ubuntu Cosmic 18.10 / Bionic 18.04 (LTS) / Xenial 16.04 (LTS)
  • Recommented Web Browser – Edge, Chrome, or Safari (latest versions)
  • Recommended Uplink Bandwidth – At least 20Mbps

Tags: ,

Sep 26

Step 1: Launch the D-ViewCam Main Console.

Step 2: Click on Configure Smart Guard System icon.

Step3: Select the camera to configure and click Insert Event. Select General motion or Signal lost and click OK.

Step4: Click Start Monitor System to start monitoring the configured events.

Note: You can click Stop Smart Guard System to stop monitoring events.

Tags: ,



 
1 2 Next
css.php