Sep 12

Select this option to turn off the LED next to the lens.

This will prevent anyone from observing the operation of the D-Link network camera.

Step 1: Log into the web-based configuration of the camera.

Step 2: Click on Setup icon on the top left corner.

Step 3: Go to System -> Device settings and then check the box for “Turn off the LED indicator”.

A10539_image1

Step 4: Click Save button to save the new settings.

Tags: ,

Sep 12

Most SD cards should work with D-Link supported cameras.

The following are SD cards that has been tested.

The maximum capacity is up to 32GB.

SanDisk 1G
SanDisk 2G
SanDisk 4G class4
SanDisk 8G class4
Transcend 1G
Transcend 2G
Transcend 4G class6
Transcend 8G class6
Transcend 16G class6
Transcend 32G class4
Transcend 32G class10
A-DATA 8G class6
A-DATA 16 class6
Toshiba 4G class4
Toshiba 8G class4
PQI 8G class6
Apacer 8G class6
Photofast 8G class6

Tags: ,

Sep 12

Note: Before removing your D-Link camera from your account, please make sure that the camera is connected to your router or has Internet access. The Cameras LED should be lit green.

You can remove your camera from your mydlink account through one the following two methods:

  1. Hard reset of your camera.
  • Locate the reset pinhole located on the back of the mydlink camera

 

A10106_image1
  • Press and hold the RESET button for 6-10 seconds while your camera is powered on. The camera will reboot and will then be at factory defaults.

Use the mydlink website to remove your D-Link camera

  • Sign in to your mydlink account.
  • From the My Devices Tab, Select the camera you want to delete and click Delete Device

 

A10106_image2

 

  • Enter your mydlink password to confirm deletion of the device.
A10106_image3

Note: After removing a camera from your account, please wait for the camera to reboot. This will take up to 2 minutes. The camera LED will turn red, then it will change to green again. This indicates that the camera has been successfully removed from your account, and you can now disconnect the power adapter from your device.

Tags: ,

Sep 11

How to configure Internet Explorer to allow ActiveX Controls for my D-Link mydlink camera?

Step 1: Open Internet Explore browser.

Step 2: From the Menu Bar, select Tools and then-Internet Options.

A10083_image1

Step 3: Click on the Security tab, select Internet, then click on the Custom Level button.

A10083_image2

Step 4: Please check the settings of ActiveX controls and plug-ins.

A10083_image3

Note: Disable settings will block your ActiveX Installation,

Note: If you have antivirus or firewall programs running, make sure they are not blocking ActiveX controls from being downloaded or running. Make sure that you have administrative rights before installing the ActiveX controls.

Tags: , ,

Sep 11

Issue:the error message “Unable to connect to mydlink website

A10127_image1

Solution:

Step 1: Open Internet Explorer web browser
Step 2: Click on the Tools tab on the menu bar
Step 3: Click Internet Options,
Step 4: Click the Privacy tab.
Step 5: Select the Medium Setting and click apply button

A10127_image2

Tags: ,



 
Prev 1 2 3 ... 8 9 10 11 12 13 14 ... 20 21 22 Next
css.php