Feb 08

In a home network, the SSID broadcast feature serves no useful purpose. You should disable this feature to improve the security of your wireless network. You will need to manually configure your wireless clients with the same SSID as your access point or wireless router.

Step 1: Open a web browser and type the IP address of the VDI-624 in the address bar (default is 192.168.0.1). Press Enter.

Step 2: The default username and password is listed below for your version of firmware:

Click OK.

Step 3: Click the Advanced tab at the top and then click Performance on the left side.

di-624-ssid

Step 4: Next to SSID Broadcast select Disabled.

Step 5: Click Apply and then click Continue to save the new settings.

Tags: ,

Feb 08

It is recommended to configure the preamble on your VDI-624 before your wireless adapters. You may need to set the preamble on all wireless clients.

Step 1: Open a web browser and type the IP address of the VDI-624 in the address bar (default is 192.168.0.1). Press Enter.

Step 2: The default username and password is listed below for your version of firmware:

# Firmware 2.39DDM – The default username is admin and the default password is blank (nothing).
# Firmware 2.43 Build 12 – The default username is admin and the default password is password.

Click OK.

Step 3: Click the Advanced tab at the top and then click Performance on the left.

di-624-preamble

Step 4: Select Short Preamble or Long Preamble next to Preamble Type. If you experience lock-ups when transferring large files, then select Short Preamble. You must also match your other wireless devices with the same preamble setting.

Note: The preamble defines the length of the CRC block for communication between the wireless access point and the roaming wireless network adapters. CRC (Cyclic Redundancy Check) is a common technique for detecting data transmission errors.

Step 5: Click Apply and then click Continue to save the new settings.

Tags: ,

Feb 02

DIR-615 and DIR-655 802.11n  wireless router look similar to the differences? Here I will describe in detail the difference between them.

1: the difference between port

DIR-615: -1 month Mbps WAN port, 4 Fast LAN port support MDI / MDI-X technology.
DIR-655: -1 Gigabit WAN port, four Gigabit LAN port support MDI / MDI-X technology.

2 Transfer rate and the amount of belt machine

DIR-615: up to 100-110M has a transmission rate, with the amount of about 20 sets machine below.
DIR-655: up to 130-140M has a transmission rate, with the amount of about 30 sets machine below.

3: DIR-655 is the world first Vista-certified through the wireless router

Through the DIR-655, users will be able to enjoy the first time, the perfect combination of Vista and network equipment brought many of the new Web experience, and to SMEs and home users of network applications and management to the limit. Vista The breakthrough lies in the establishment of a network of mains mechanism, which will be able to detect the network of certified products, so many complex network infrastructure at a glance. In the past the event of network disconnection occurs, users often need to gradually test failure point of failure, and now through the Internet Explorer network map feature, you can easily find the point of failure lies. In addition, Vista also uses a number of ways to enhance the wireless network, in which network aware feature allows an application aware of the network changes and thereby enables applications to achieve optimization.

Conclusion: Both products are soho products, with high performance, Dlink DIR-655 slightly better, not bad money for a friend who, DIR-655 is the only choice available, signal stability, and rate it faster our greatest strength.

Tags: ,

Feb 02

Many people use the D-Link product, forget their default IP address and user name, password, bring a lot of trouble.Here are some D-Link product infomation:

1. Dlink switch products:

① low product management, IP: 192.168.0.1. If DES-1226G/1250G, DGS-1224T/1216T so.

② high product management, IP: 10.90.90.90. If DES-3226S/DES-3326SR/DES-3350SR/DES-3526/DES-3550/DXS * / DGS-3 * / DES-6500 and so on.

User name and password are generally the “admin”.

2. Dlink router products:

① Household soho-based management of IP: 192.168.0.1. Such as the DI-504, DI-624 + A, DI-604 and so on. User name admin, password is blank

② management of enterprise-class router IP: 192.168.2.1. Such as the DI-602LB +, DI-602MB + and so on. User name and password are admin.

3. Dlink wireless AP products:

Management IP: 192.168.0.50. Such as the DWL-2100, DWL-2700 and so on. User name admin, password is blank.

4. Dlink firewall products:

Management IP: 192.168.1.1. Such as the DFL-210, DFL-800 and so on. User name admin, password is blank.

5. Dlink print server:

Management IP: 192.168.0.1, username admin, password is blank.

Tags:

Feb 01

Step 1: For windows XP users click on the “Start” button, select run and type in the IP address of your router. By default the IP address of the router is 192.168.0.1. You must include two back slashes before the IP address (also known as wack wack´s) .

In Windows Vista or 7 click on the start button and in the search field type in the IP address of the router and hit enter.

How to access storage on the D-Link DIR-685 from windows?

Step 2: A Window should pop open showing you folders you´ve created on the drive.

How to access storage on the D-Link DIR-685 from windows?

Step 3: Click on a folder and if you created user names and groups to specific folder, you will be prompted to enter in those login credentials.

DIR-685-3

Tags:



 
Prev 1 2 3 ... 41 42 43 44 45 46 47 48 49 50 51 Next
css.php