Jan 28

client mode

Client Mode allows the D-Link DWL-2100AP to become a wireless client to another AP or wireless router. Client mode allows any device with an Ethernet connection to connect to your wireless network, such as a printer, gaming console (Xbox, PS2), or a computer.

You will need the MAC address of the device you want to be a client to. If you are connecting to a wireless router, then you must use the LAN or Ethernet MAC address, not the wireless address.

Step 1: Connect the DWL-2100AP to your PC using an Ethernet cable. You cannot connect to the DWL-2100AP wirelessly when in client mode.

Step 2: Your computer will need to be in the same IP address range as the DWL-2100AP for configuration. The default IP address is 192.168.0.50.

Step 3: Open a web browser and enter in the IP address of the access point (192.168.0.50). The username is admin (all lower case) and the password is blank (nothing).

Step 4: Click on Advanced at the top and then click Mode on the left side. At the bottom, click the AP Client button. Enter the MAC address of the device you want to repeat (IE 50:23:AB:D4:56:E1).

How to set D-Link DWL-2100AP to client mode and repeater mode?

Step 5: Click Apply to save your settings.

repeater mode

You will need the MAC address of the device you want to repeat. If you are repeating a wireless router, then you must use the LAN or Ethernet MAC address, not the wireless address.

Step 1: Connect the DWL-2100AP to your PC using an Ethernet cable. You cannot configure the DWL-2100AP wirelessly when in repeater mode.

Step 2: Your computer will need to be in the same IP address range as the D-Link DWL-2100AP for configuration. The default IP address is 192.168.0.50.

Step 3: Open a web browser and enter in the IP address of the access point (192.168.0.50). The username is admin (all lower case) and the password is blank (nothing).

Step 4: Click on Advanced at the top and then click Mode on the left side. At the bottom, click the AP Repeater button. Enter the MAC address of the device you want to repeat (IE 50:23:AB:D4:56:E1).

How to set D-Link DWL-2100AP to client mode and repeater mode?

Step 5: Click Apply to save your settings.

Tags:

Jan 28

Access Point Mode

The DWL-2100AP is set to Access Point (AP) mode by default, which allows the DWL-2100AP to connect to wireless clients.

Step 1: Using an Ethernet cable connect the DWL-2100AP to your PC.

Step 2: Your computer will need to be in the same IP address range of the DWL-2100AP for configuration. The default IP address of the DWL-2100AP is 192.168.0.50.

Step 3: Open a web browser and type the IP address of the DWL-2100AP in the address bar (default is 192.168.0.50). Press Enter.

Step 4: The default username is admin (all lower case) and the default password is blank (nothing). Click OK.

Step 5: Select the Advanced tab and the Mode button.

Step 6: Select Access Point using the radio buttons.

DWL-2100AP-a

Step 7: Click Apply and then click Continue to save new settings.

Point-to-Point Bridge

As a wireless bridge the DWL-2100AP allows you to connect two wireless LANs together.

Step 1: Log into the Access Point or Wireless Router that the D-Link DWL-2100AP is going to bridge and write down the Ethernet MAC Address or LAN Mac Address.

Step 2: Using an Ethernet cable connect the DWL-2100AP to your PC.

Step 3: Your computer will need to be in the same IP address range of the DWL-2100AP for configuration. The default IP address of the DWL-2100AP is 192.168.0.50.

Step 4: Open a web browser and type the IP address of the DWL-2100AP in the address bar (default is 192.168.0.50). Press Enter.

Step 5: The default username is admin (all lower case) and the default password is blank (nothing). Click OK.

Step 6: Select the Advanced tab and the Mode button.

Step 7: Select PtP Bridge using the radio buttons.

Step 8: In the Remote AP MAC Address field enter the MAC Address you obtained in Step 1.

DWL-2100AP-b

Step 9: Click Apply and then click Continue to save the new settings.

Tags: ,

Jan 26

Step 1: Attach the USB hub to you PC with the USB cable provided.

DUB-1210a

Step 2: Open the Wireless USB Control Center software

DUB-1210b

Step 3: Select the Administration tab

DUB-1210c

Step 4: Enter Admin password in the Enter New Adminstration password field and enter password again in the Confirm Adminstration password field to confirm and click Set. User Passwords can also be set here.

When attempting to access the Administration screen you will be prompted to enter the administrator password:

DUB-1210d

Tags: ,

Jan 24

This article teaches how do set or change the admin password on DAP-1555/1522.

Step 1 Open a web browser and type the friendly name (http://dlink). Press Enter .

Step 2 The default password is blank (nothing). Click Log In.

How do set or change the admin password on DAP-1555/1522

Step 3: Click Maintenace at the top:

How do set or change the admin password on DAP-1555/1522

Step 4: In the Admin section enter your new password next to Password and enter it again next to Verify Password.

Step 5: Click Save Settings at the top to save the new password.

NOTE: If you forget your password you will have to reset the DAP-1555/1522.

Tags: ,

Jan 21

DUBAI, UAE, January 21 /PRNewswire/ — D-Link Middle East, the end-to-end computer network solutions provider for consumers and businesses, today announced the release of the company’s new DWA-525, a wireless N 150 desktop adapter.

The DWA-525 is a single-antenna wireless N desktop adapter that delivers abstracts at speeds up to 150 Mbps*. Compatible with IEEE 802.11b/g/n standards, this accessory provides continued advantage and accession in allegory to 802.11b/g standards, accouterment bigger ambit to abate wireless asleep spots. The DWA-525 also includes Wi-Fi Multimedia and Power Save QoS support to prioritize media traffic while conserving battery power in smaller devices.

“Higher transmission speeds have become essential for smooth operation in a number of today’s newest multimedia applications and devices,” said Harrison Albert, Regional Sales Director at D-Link Middle East. “The D-Link DWA-525 allows consumers to utilize the high speed that wireless N provides all at an affordable price.”

For added convenience, the DWA-525 supports Wi-Fi Protected Setup (WPS) to bound defended and set up a wireless network. This accessory includes 64/128-bit WEP encryption and WPA/WPA2 aegis to assure user networks and wireless data. The DWA-525 aswell offers complete interoperability in the 802.11b/g standard.

Tags: ,



 
Prev 1 2 3 ... 18 19 20 21 22 23 24 25 26 27 28
css.php