Nov 04

Yes, you can bring your camera and connect directly to the camera’s wireless signal when you are on the move or at a friend’s house – no need for a separate wireless network/ router.

Note: When connecting directly to the camera’s wireless connection (not the router) for monitoring, your mobile device will not have access to the Internet using this WiFi connection. Internet acces can only be set up using your router’s or AP wireless network.

First time camera users:
Connect your mobile device to the “myBabyCam-xxxx” Wi-Fi network where XXXX is a 4-digit code (the last 4 digits of your camera’s MAC address). The Wi-Fi password is printed on the label at the bottom of the camera and on the back of the QIG.

A10686_image1

Launch the “mydlink™ Baby” app and tap the “View” button on the start screen

A10686_image21

Previously setup camera users:

Press and hold the volume + button on the camera for at least 5 seconds. (The LED on the camera will flash 3 times)

A10686_image3

Connect your mobile device to the “myBabyCam-xxxx” Wi-Fi network where XXXX is a 4-digit code (the last 4 digits of your camera’s MAC address). The Wi-Fi password is printed on the label at the bottom of the camera and on the back of the QIG.

A10686_image11

Open the mydlink Baby Camera app and tap the ‘Reconnect’ button for the camera or tap the “View” button on the start screen.

A10686_image4

A10686_image2

Enjoy connecting to your wireless Baby Camera directly using your iOS or Android compatible mobile device.

Be Sociable, Share!

Tags: , ,

No Comments


(Required)
(Required, will not be published)

css.php