Feb 27

During the initial steps with the Setup Wizard, you configured the camera to connect to your home Wi-Fi network. If you want to take your camera with you when you are traveling, it’s not a problem with the D-Link DCS-825L. You can connect directly to your D-Link camera, which means there is no need for an Internet connection or a router. Follow the steps below to enable direct connect.

DCS-825L-1

1. Press and hold the (+) button on the camera for at least five seconds. The temperature indicator LED on the top of the camera will flash three times.

2. Connect your mobile device to the myBabyCam-xxxx Wi-Fi network.(XXXX is a 4-digit code, the last 4 digits of your camera’s MAC address.) The Wi-Fi password is printed on the label located on the bottom of the camera.

DCS-825L-Direct-Connect

3.Open the mydlink Baby Camera app. To connect, tap the Reconnect button for the camera.

DCS-825L-Direct-Connect1

Note: For an additional mobile device, download the mydlink Baby app on the device and launch the app. You will see the Setup Wizard screen. Tap View.

DCS-825L-Direct-Connect3

Enter the camera password that was created during the initial setup.

DCS-825L-Direct-Connect2

 

4. To switch back to connecting the D-Link DCS-825L with your home Wi-Fi network, press the (-) button on the camera for at least five seconds.

DCS-825L-Direct-Connect4

Be Sociable, Share!

Tags: , ,

No Comments


(Required)
(Required, will not be published)

css.php