Apr 14

During the initial steps with the Setup Wizard, you configured the camera to connect to your home Wi-Fi network. If you want to take your camera with you when you are traveling, it’s not a problem with the D-Link DCS-825L. You can connect directly to your camera, which means there is no need for an Internet connection or a router. Follow the steps below to enable direct connect.

1.Press and hold the (+) button on the camera DCS-825L for at least five seconds.The temperature indicator LED on the top of the camera will flash three times.

DCS-825L01

2.Connect your mobile device to the myBabyCam-xxxx Wi-Fi network.(XXXX is a 4-digit code, the last 4 digits of your camera’s MAC address.)The Wi-Fi password is printed on the label located on the bottom of the camera.

DCS-825L02

3.Open the mydlink Baby Camera app. To connect, tap the Reconnect button for the camera.

DCS-825L03

Note: For an additional mobile device, download the mydlink Baby app on the device and launch the app. You will see the Setup Wizard screen. Tap View.

DCS-825L04

Enter the camera password that was created during the initial setup.

4.To switch back to connecting the D-Link DCS-825L with your home Wi-Fi network, press the (-) button on the camera for at least five seconds.

DCS-825L05

Be Sociable, Share!

Tags: ,

No Comments


(Required)
(Required, will not be published)

css.php