Dec 16

Step 1 Connect an Ethernet cable to the Ethernet port located on the back of the camera and connect it to a networking device such as a router or switch.

A10379_image1

If you are connecting the D-Link DCS-3220G to a wireless network connect the antennas to the back of the unit.

Step 2 Attach the external power supply to the DC power input connector located on the back on the camera labeled 12V DC and connect the other end to a wall outlet.

A10379_image2

When you have a proper connection, the LED will change from red to green. If you are directly connected to the camera via a crossover cable, the light may cycle on and off and your computer may show an intermittent loss of connectivity. This will stop once you have configured the camera from your computer.

Step 3 Use the Install Wizard to detect the camera.

Be Sociable, Share!

Tags: ,

No Comments


(Required)
(Required, will not be published)

css.php