Feb 26

• Make sure your camera is turned on and receiving power.

• If you are setting up a new camera, make sure your smartphone or tablet is connected to the camera’s Wi-Fi signal (not your wireless router).

• The Wi-Fi network name should be [myBabyCam-XXXX], where XXXX is a 4-digit code (the last 4 digits of your camera’s MAC address).

• The Wi-Fi network name and password is printed on a label on the bottom of your camera and on the back of this install guide.

• If you still can’t find your camera, reset your camera by pressing its reset button for 10 seconds (while it is powered on).

Be Sociable, Share!

No related posts.

Tags: ,

No Comments


(Required)
(Required, will not be published)

css.php