1.DHCP Server Settings
DHCP stands for Dynamic Host Control Protocol. Thehas a built-in DHCP server. The DHCP Server will automatically assign an IP address to the computers on the LAN/private network. Be sure to set your computers to be DHCP clients by setting their TCP/IP settings to “Obtain an IP Address Automatically.” When you turn your computers on, they will automatically load the proper TCP/IP settings provided by the . The DHCP Server will automatically allocate an unused IP address from the IP address pool to the requesting computer. You must specify the starting and ending address of the IP address pool.
Enable DHCP Server:
Check this box to enable the DHCP server on your router. Uncheck to disable this function.
DHCP IP Address Range:
Enter the starting and ending IP addresses for the DHCP server’s IP assignment.
Note: If you statically (manually) assign IP addresses to your computers or devices, make sure the IP addresses are outside of this range or you may have an IP conflict.
DHCP Lease Time:
The length of time for the IP address lease. Enter the Lease time in minutes.
Enable this feature to broadcast your networks DHCP server to LAN/WLAN clients.
NetBIOS allows LAN hosts to discover all other computers within the network, enable this feature to allow the DHCP Server to offer NetBIOS configuration settings.
Learn NetBIOS from WAN:
Enable this feature to allow WINS information to be learned from the WAN side, disable to allow manual configuration.
This feature allows the configuration of a NetBIOS ‘domain’ name under which network hosts operates. This setting has no effect if the ‘Learn NetBIOS information from WAN’ is activated.
NetBIOS Mode Type:
Select the different type of NetBIOS node: Broadcast only, Point-to-Point, Mixed-mode, and Hybrid.
Primary/Secondary WINS IP Address:
Enter your Primary (and Secondary) WINS IP address(es).
If you want a computer or device to always have the same IP address assigned, you can create a DHCP reservation. The router will assign the IP address only to that computer or device.
Note: This IP address must be within the DHCP IP Address Range.
Check this box to enable the reservation.
Enter the computer name or select from the drop-down menu and click <<.
Enter the IP address you want to assign to the computer or device. This IP Address must be within the DHCP IP Address Range
Enter the MAC address of the computer or device.
Copy Your PC’s MAC Address:
If you want to assign an IP address to the computer you are currently on, click this button to populate the fields.
Click Save to save your entry. You must click Save Settings at the top to activate your reservations.