Aug 07

This article is for the DI-514, DI-524, DI-614+, DI-624, DI-624S, and DI-714P+ Wireless Settings.

1.How to change the preamble on my DI series wireless router?

Step 1: Open a web browser and type the IP address of the wireless router in the address bar (default is 192.168.0.1). Press Enter.

Step 2: The default username is admin (all lower case) and the default password is blank (nothing). Click OK.

Step 3: Click the Advanced tab and then click Performance to the left.

dlink-performance

Step 4: Select Short or Long next to Preamble Type. If you experience lock-ups when transferring large files, then select Short preamble. You must also match your other wireless devices with the same preamble setting.

Note: The preamble defines the length of the CRC block for communication between the wireless access point and the roaming wireless network adapters. CRC (Cyclic Redundancy Check) is a common technique for detecting data transmission errors.

2.How to change the SSID on D-Link wireless router?

Step 1: Open your web browser and type the IP address of the router in the address bar. The default IP address is 192.168.0.1. At the login, enter your username (admin) and password (default password is blank).

Step 2: Click on the Home tab at the top of the configuration page and then click the Wireless button on the left side.

Step 3: Next to SSID, type in a new SSID.

The SSID (Service Set Identifier) is the workgroup name of your Wireless Network. All devices (access points, wireless routers, and wireless adapters) must have the same SSID to communicate on the Wireless Network. The SSID can be up to 32 numbers, letters, spaces, and dashes. Also, the SSID is case-sensitive.

dlink-changessid

Step 4: Click Apply and then click Continue to save your settings.

3.How to change the channel on DI series wireless router?

In the 802.11b/g (2.4Ghz) standard there are 11 channels (US) to choose from, all but three are overlapping channels. Channels 1, 6, and 11 are the only non-overlapping channels. The channels can be changed to avoid interference from other wireless devices that run on the 2.4 Ghz frequency range (I.E. 2.4Ghz cordless phones, bluetooth, and X-10).

Step 1: Open your web browser and type the IP address of the router in the address bar. The default IP address is 192.168.0.1. At the login, enter your username (admin) and password (default password is blank).

Step 2: Click on the Home tab at the top of the configuration page and then click the Wireless button on the left side.

Step 3: Select a channel from the drop-down menu. For best results, use channel 1, 6, or 11.

dlink-changechannel

Step 4 Click Apply and then click Continue to save your settings.

Be Sociable, Share!

Tags: , , , , ,

No Comments


(Required)
(Required, will not be published)

css.php