Sep 22

Select Static IPv6 from the My IPv6 Connection is drop-down menu if your D-Link DIR-815 Router will use a static IPv6 address to connect to the Internet.

DIR-815-Static-IPv6

WAN IPv6 Address Settings:

Enter the address settings supplied by your Internet provider (ISP).

LAN IPv6 Address:

Enter the LAN (local) IPv6 address for the router.

LAN IPv6 Link‑Local Address:

Displays the Router’s LAN Link-Local Address.

LAN Address Autoconfiguration Settings:

Use this section to configure the IPv6 autoconfiguration settings.

Static IPv6 (Stateless)

To configure the Router to use a Static IPv6 Stateless connection, configure the parameters in the LAN Address Autoconfiguration Settings section as described below:

DIR-815-Static-IPv6-Stateless

Enable Autoconfiguration:

Check to enable the Autoconfiguration feature.

Autoconfiguration Type:

Select the Stateless option from the drop-down menu.

Router Advertisement Lifetime:

Enter the Router Advertisement Lifetime (in minutes).

Click the Save Settings button to save any changes made.

Static IPv6 (Stateful)

To configure the Router to use a Static IPv6 Stateful connection, configure the parameters in the LAN Address Autoconfiguration Settings section as described below:

DIR-815-Static-IPv6-Stateful

Enable Autoconfiguration:

Check to enable the Autoconfiguration feature

Autoconfiguration Type:

Select the Stateful(DHCPv6) option from the drop-down menu.

IPv6 Address Range Start:

Enter the start IPv6 Address for the DHCPv6 range for your local computers.

IPv6 Address Range End:

Enter the end IPv6 Address for the DHCPv6 range for your local computers.

IPv6 Address Lifetime:

Enter the IPv6 Address Lifetime (in minutes).

Click the Save Settings button to save any changes made.

Be Sociable, Share!

Tags: , ,

No Comments


(Required)
(Required, will not be published)

css.php