Sep 05

This will allow you to open a single port or a range of ports on D-Link DIR-825 Router.



Enter a name for the rule or select an application from the drop-down menu. Select an application and click << to populate the fields.

IP Address:

Enter the IP address of the computer on your local network that you want to allow the incoming service to. If your computer is receiving an IP address automatically from the router (DHCP), you computer will be listed in the “Computer Name” drop-down menu. Select your computer and click <<.


Enter the TCP and/or UDP port or ports that you want to open. You can enter a single port or a range of ports. Separate ports with a common.


The schedule of time when the Virtual Server Rule will be enabled. The schedule may be set to Always, which will allow the particular service to always be enabled. You can create your own times in the Tools > Schedules section.

Inbound Filter:

Select Allow All (most common) or a created Inbound filter. You may create your own inbound filters in the Advanced > Inbound Filter page.

Be Sociable, Share!

Tags: ,


  • At 2013.07.12 14:08, company of heroes 2 serial patch said:

    Thank you a lot for sharing this with all folks you actually realize what you are talking
    about! Bookmarked. Kindly additionally visit
    my web site =). We could have a hyperlink exchange arrangement among us

    • At 2013.08.05 23:02, company of heroes 2 key serialnumber said:

      I’m not that much of a internet reader to be honest but your blogs really nice, keep it
      up! I’ll go ahead and bookmark your site to come back in the future. Many thanks

      • At 2014.03.08 15:20, jaime said:

        Thanks for the guide.
        After port forward is set one can test port forwarding at

        (Required, will not be published)