To run the security wizard, click on Setup at the top and then click Launch Wireless Security Setup Wizard.This article in D-Link DIR-825 as an example.
Check the Manually set 5GHz band Network Name… box to manually set your desired wireless network name for the 5GHz band.
Type your desired wireless network name (SSID).
Automatically: Select this option to automatically generate the D-Link router’s network key and click Next.
Manually: Select this option to manually enter your network key and click Next.
If you selected Automatically, the summary window will display your settings. Write down the security key and enter this on your wireless clients. Click Save to save your settings.
If you selected Manually, the following screen will appear.
Add Wireless Device with WPS Wizard
From the Setup > Wireless Settings screen, click Add Wireless Device with WPS.
Select Auto to add a wireless client using WPS (Wi-Fi Protected Setup). Once you select Auto and click Connect, you will have a 120 second time limit to apply the settings to your wireless client(s) and successfully establish a connection.
PIN: Select this option to use PIN method. In order to use this method you must know the wireless client’s 8 digit PIN and click Connect.
PBC: Select this option to use PBC (Push Button) method to add a wireless client. Click Connect.
Tags: DIR-825, Wireless Device, Wireless Security, WPS
I HATE YOUR ROUTER> I HAVE FOOLED WITH IT FOR ANOTHER DAY AND IT WILL NOT COOPERATE IT IS A WASTE .
DIR-825 has a stupid way to configure firewall compared to a standard approach – last rule disables all and rules above allow protocols or ports from specific IP addresses or ranges to specific IP addresses. DIR-825 allows by default all and the only method is to create a disable rule which is pretty stupid!!!
There were a grat products like DFL-200, unfortunately it seems it is a history…