Step 1 Verify the IP address of the computer you want to access.
Step 2 Access the router’s web management by entering its IP address in the browser (192.168.0.1). Username isadmin and the password is left blank.
Step 3 Click the Advanced tab, then click the Virtual Server button.
Step 4 Enter the following information:
- Click Enabled
- Private IP address: Enter the IP address of the computer you want to access.
- Protocol Type: Select Both.
- Public Port/Private Port: Enter 3389 in both the public and private port fields.
- Schedule: Click Always.
Step 5 Click Apply and then Continue.
Step 6 To access the computer from the Internet, you must use the WAN IP address of the router, not the computer. To get the WAN IP address of the router, login as above and click on the Status tab.
NAT does not allow forwarding the same service port to multiple computers.