Jan 23

This FAQ will demonstrate how to set up port binding for secure http on D-Link DI-LB604 WAN port 1.

Step 1: Open a web browser and type the IP address of the DI-LB604 into the address bar (default is 192.168.0.1).

Step 2: The default username is admin (all lower case) and the default password is blank (nothing). Click on OK.

Step 3: Click on the Tools tab at the top, then click on Misc on the lefthand side.

Step 4: Click on the Set Protocol & Port Binding button at the bottom of the page.

DI-LB604-WAN1

Step 5: Create Rule as Followed:

Enable
Source IP: 0.0.0.0
Dest. IP: Subnet
IP Address: 0.0.0.0
Subnet Mask: 255.255.255.0
Protocol: Both
Port Range: 443-443
Wan: Wan 1

DI-LB604-WAN2

Step 6: Click Apply

Be Sociable, Share!

Tags: , ,

No Comments


(Required)
(Required, will not be published)

css.php