Aug 07

You must open ports 6881-6999 (TCP) on your router to allow incoming traffic. If you are using a version of BitTorrent older than 3.2, then you only need to open ports 6881-6889.

1.IF you router is  the D-Link DI-5xx, DI-6xx, DI-704P (revC), DI-704UP, DI-754, DI-764, DI-774, DI-784, DI-804HV, DI-808HV, and DI-824VUP:

The following configuration will allow multiple computers behind the router use BitTorrent.

Step 1: Open your web browser and enter the IP address of your router (192.168.0.1). Enter username (admin) and your password (leave blank).

Step 2: Click on Advanced and then click Applications.

Step 3: Create a new entry:

  • Click Enabled.
  • Enter a name (BitTorrent).
  • Next to Trigger Port, enter 6881 in the first box and 6999 in the second box.
  • Next to Trigger Type, select TCP.
  • Next to Public Port, enter 6881-6999.
  • Next to Public Type, select TCP.

dlink-bittorrent

Step 4 Click Apply and then Continue.

2.For the DI-704P (rev.B) and DI-707P:

Step 1: Open a web browser and enter the IP address of your router (192.168.0.1). Enter admin for your username and then your password (blank by default).

Step 2: Click on the Advanced tab and then Virtual Server on the left side.

Step 3: Enter the following information:

  • Check the box next to Enable.
  • Next to Service Ports, enter 6881-6999.
  • Next to Service IP, enter the IP address of the computer you want to use BitTorrent from.
  • Click Always next to Schedule or enter the time frame that you want.

 dlink-bittorrent2

Step 4: Click Apply and then click Restart to save your changes.

3.For the DI-704P (revA), DI-704, DI-707, DI-711 (revA), DI-713, and DI-713P:

Step 1 Open a web browser and enter the IP address of your router (192.168.0.1). Enter admin for your username and then your password (blank by default). If there is only one box, then enter admin.

Step 2 Click on Advanced at the bottom and then Virtual Server.

Step 3 Enter the following information:

  • Under Service Ports, enter 6881-6999.
  • Under Service IP, enter the IP address of the computer you want to use BitTorrent from.
  • Click the enable box.

Step 4 Click Save and then click Reboot (if prompted).

dlink-bittorrent3

Be Sociable, Share!

Tags: , , , ,

2 Comments

  • At 2010.11.07 19:41, robert pratte said:

    Have a d-link WBR-1310 how to configure it download torrent files

    • At 2014.07.31 13:07, FelixCold said:

      This guide is some absolute misleading crap.
      Following the above rules one two DI-604 routers with different firmware gives almost the same useless result – in one case after clicking “apply” the new setting just doesn’t appear at all, in another case it initially appears at the bottom of the list but after going to any other menu & back – that new setting dissappears.
      In result, torrent software still doesn’t see any open ports in any case.
      Thank you D-link for one more useless crap.


      (Required)
      (Required, will not be published)

      css.php