Jun 25

1.Unplug the power to your DSL or Cable modem.

Connect your Wireless N150 Cloud Router DIR-600L

2.Connect an Ethernet cable from the Internet port of the D-Link DIR-600L router to the Ethernet port on your DSL or Cable modem.

Connect your Wireless N150 Cloud Router DIR-600L_2

3.Connect another Ethernet cable from the Ethernet port on your computer to one of the LAN ports on the router.

Connect your Wireless N150 Cloud Router DIR-600L_3

4.Plug the power back into your DSL or cable modem. Please wait about one minute before continuing.

Connect your Wireless N150 Cloud Router DIR-600L_4

5.Plug the power adapter into your router and connect to an available power outlet or surge protector.

Connect your Wireless N150 Cloud Router DIR-600L_5

6.After the router has powered up, verify that the Power and Internet LEDs are both lit then continue with the Configuration section on the other side.

There are two ways to configure your DIR-600L router:

A. Web Browser – Use a web browser from your computer.
B. QRS Mobile app – Use a mobile device with the D-Link QRS Mobile app.
Refer to the QRS Mobile Setup section for more information.

Be Sociable, Share!

Tags: , ,

No Comments


(Required)
(Required, will not be published)

css.php