Feb 10

It is recommended to configure WPA on your wireless router before your wireless network adapters.

Step 1 Open a web browser and type the IP address of the wireless router in the address bar (default is Press Enter.

Step 2 The default username is admin (all lower case) and the default password is blank (nothing). Click OK.

Step 3 Click the Home tab and then click Wireless to the left.

Step 4 Next to WEP select WPA using the radio buttons.

Step 5 Under 802.1X enter the IP Address, Port and Shared Secret for RADIUS Server 1. Repeat for RADIUS Server 2 if applicable.

Step 6 Click Apply and then Continue to save the new settings.

Be Sociable, Share!

Tags: , , ,

No Comments

(Required, will not be published)