Step 1: You can download the™ utility for your router at support.dlink.com and navigate to the Application section of the page and download the latest ™ utility.
Note: You must have the latest firmware for your router which adds the SharePort™ feature.
Step 2: The file you have downloaded is a zip file. You will need to extract the content in that file to a location you can navigate to, such as your Desktop. After extracting the file, navigate to the location you´ve extracted the file to, open the folder and double click on the Setup32 executable file to begin installation.
Step 3: An Install Wizard will start. Select your language and Click Next to continue.
Step 4: The wizard will then ask you to close any running programs. Click Next to begin.
Step 5: The wizard will then ask you where you would like to install the utility. Click Next to continue.
Step 6: Select a Start Menu Folder and click Next to continue.
Step 7: Click Start to begin installation.
Step 8: The wizard will continue to install the utility.
Step 9: Click Finish.
Step 10: The utility will detect if you have anything connected to the USB port of the router.
Step 11: Connect any externalto the USB port of the router. The SharePort™ utility will detect the .
Step 12: Click Connect the USB device icon to connect to the drive or Disconnect the USB device to disconnect.
Step 13: You can open the SharePort™ utility by double-clicking the USB icon located in the system tray of the bottom right-hand corner where the time is.
You should now be able to view content in your storage device.