Apr 22

1.How to open ports on D-Link DGL-4100/DGL-4300?

The Virtual Server feature allows access to services on your LAN from the Internet. This feature is useful for hosting online services such as FTP, web, or game servers.

Step 1: Open a web browser and type the IP address of the DGL-4100/DGL-4300 in the address bar (default is 192.168.0.1). Press Enter.

Step 2: The default password is blank (nothing). Click Log In.

Step 3: Click Advanced at the top and then click Virtual Server on the left side.

DGL-4300c

Step 4: Configure the following:
Enable – Select the checkbox to enable this rule.
Name – Enter a name to identify this rule or select a pre-defined rule using the drop-down list to the right.

DGL-4300d

IP Address – Enter the LAN IP address of the computer that is hosting the service.
Protocol – Select the protocol (TCP or UDP).

DGL-4300e

Private Port – Enter the port on the LAN interface that the service is running on.
Public Port – Enter the public port that will be forwarded to the private port from the WAN interface. The public and private port(s) are usually the same.
Schedule – Select Always.

DGL-4300f

Step 5: Click Save Settings at the top to save this rule.

2.How to configure UPnP™ on D-Link DGL or DIR Gaming router?

This FAQ is for the DGL Gaming router series.

Universal Plug and Play (UPnP) allows discovery of UPnP enabled devices in a network environment. UPnP is only available on Windows Me, XP and Windows Vista. If you are not using either operating system on any of your computers, or do not want to use UPnP, then it is recommended to disable UPnP on the router.

Click here for more info on UPnP.

Step 1: Open a web browser and type the IP address of the wireless router in the address bar (default is 192.168.0.1). Press Enter.

Step 2: The username is admin (all lower case) and, by default, the password is blank (nothing). Click OK.

Step 3: Click on the Advanced tab at the top and then click on Advanced Network on the left-hand side.

Step 4: Under the UPnP Settings section, check-mark the Enabled UPnP buttons to enable UPnP on the wireless router, or uncheck it to Disabled it.

Step 5: Click Save Settings at the top to apply the settings.

Be Sociable, Share!

Tags: , , ,

No Comments


(Required)
(Required, will not be published)

css.php