Aug 24

To upgrade the firmware on the gateway download the latest firmware from the downloads page and follow the directions below.

The firmware for the D-Link DI-704, DI-704P, DI-707, DI-713, and DI-713P:

Please Note: If all of the features of your gateway are operational, do not upgrade the firmware. It will not make your gateway run better and may even disable some features that you are currently using. If it´s not broken, don´t fix it.

Step 1 Download the D-Link DI-704 firmware to your computer.

Step 2 Double-click on this self-extracting file. A window will open allowing you to select a destination folder for the file. It really doesn´t matter where this folder is as long as you can find the file after you click the Unzip button.

Select a destination and click on the Unzip button.

Step 3 Navigate to the destination folder and double-click on the firmware file which will look like the image below.

Step 4 This will open the following window. Enter your password and click OK . This will be the same password that you use to enter the web configuration.


Step 5 You will be prompted to confirm that you want to continue with the upgrade if there are other computers connected to the gateway. Click OK to continue with the upgrade.


Step 6: You will then see a progress bar.


Once it has reached 100% you will be notified that the upgrade was successful. Click OK to close this window. Your gateway´s firmware has now been upgraded.

Step 7: Recycle the power on the gateway by shutting it off for 20 to 30 seconds and then turning it back on again. After upgrading the firmware, it may be necessary to reconfigure your settings. Please check your configuration settings before trying to connect to the Internet.

Be Sociable, Share!

Tags: , ,

1 Comment

  • At 2011.04.22 21:18, said:

    How to upgrade the firmware for the d link di 704 di 704p di 707 di 713 and di 713p.. Not so bad 🙂

    (Required, will not be published)