Aug 11

The following FAQ is for the D-Link DI-514, DI-524, DI-604, DI-614+, DI-624, DI-624S, DI-774, and DI-784.

Zipit only supports an open authentication and a long preamble. Follow the steps below to setup your router.

Note: If you are using WEP encryption, your network will be less secure when using an Open Authentication. You must also set your wireless clients to an Open Authentication (or Auto).

Step 1 Open a web browser and enter the IP address of the router (

Step 2 Enter the username (admin) and your password (blank by default).

Step 3 Click on Advanced and then click Performance on the left side.

Step 4 Set the Preamble Type to Long and the Authentication to Open System. Click Apply to save your settings.


Note: Depending on your firmware version, one or both of these options may be in a different location (Home > Wireless).

Be Sociable, Share!

Tags: , , ,

No Comments

(Required, will not be published)