Your AP may be showing offline because the Nuclias Connect server IP address does not match the server IP settings in the access point. Check to make sure the access point is powered on. It is recommended that your Nuclias Connect Server has a statically assigned IP Address.
Step 1: Log into your access point and confirm the Nuclias Connection status
NOTE: This example shows the Connection status as Disconnected and the server IP address is 192.168.0.125
Step 2: Check the IP address on the computer that is running the Nuclias connect software
NOTE: This computer IP address is 192.168.0.222. Which is different then the server IP address on the access point. This is why the Nuclias connect software is showing the AP offline
Step 3: Launch the Nuclias Connect Software
Step 4: Click on System > Settings
Step 5: Click on the Connection tab and change the Device access address to the IP address of the computer.
NOTE: In this example the IP address is 192.168.0.222
– Click Save
Step 6: Click on Configuration > Create Profile
Step 7: Click on Discovery icon for your profile
NOTE: You should see your profile listed. In this example my profile is called PS-HOME
Step 8: Select your discover settings, then tap NEXT
Step 9: Click on Start Discovery
Step 10: Select your AP and click Apply, then Exit
Step 11: Click on Monitor and your AP should show online
No related posts.
