Nov 29

How to enable Auto-rebuild in case RAID becomes degraded on D-Link ShareCenter?

D-Link Storage Add comments

A10404_image1

Step 1: Log into the ShareCenter and go to the Advanced tab click RAID on the left side of the screen.

A10404_image2

Step 2: Click Enable Auto-Rebuild then click the Apply button.

A10404_image3

Step 3: Click the Status tab and verify the Sync Time Remaining. Once the Sync Time Remaining is Completedthe RAID is now in sync.

A10404_image4

A10404_image5

Note: If sync time turns returns to 0 minutes and has a message Sync Time Remaining: Degraded still. You can perform a Disk Diagnostic to determine which drive is failing. To do this go to the Maintenance tab and click the Disk Diagnostic tab on the left hand side. Next select your drive(s) you wish to test and click Start.

A10404_image6

Note: You can configure e-mail alerts to alert you when rebuilding is complete or the status becomes degraded.

A10404_image7

Be Sociable, Share!

Tags: ,

No Comments


(Required)
(Required, will not be published)

css.php