Dec 03

Step 1: Connect the serial cable to the switch and connect using a terminal application (ex: hyperterminal, Teraterm…etc.)

Step 2: Reboot the D-Link switch and select 2 to start the boot menu.

Step 3: Select number 10 to (Restore configuration to factory defaults (delete config files) and number one to start operation code than click on Enter.


CPU Card ID: 0xa28245
Boot Menu Version (Date): 14 MAR 2008
Select an option. If no selection in 10 seconds then
operational code will start.

1 – Start operational code.
2 – Start Boot Menu.
Select (1, 2):2

Boot Menu Version (Date): 14 MAR 2008

Options available
1- Start operational code
2- Change baud rate
3- Retrieve event log using XMODEM
4- Load new operational code using XMODEM
5- Display operational code vital product data
6- Run flash diagnostics
7- Update boot code
8- Delete operational code
9- Reset the system
10 – Restore configuration to factory defaults (delete config files)
11 – Activate Backup Image
[Boot Menu] 10
[Boot Menu] 1

Operational Code Date: Tue Aug 17 01:16:14 2010
Uncompressing….. 100%
Attaching interface lo0…done

Adding 41648 symbols for standalone.

(Unit 1)>

Step 4) Login to the DWS both Telnet or WEB, using the default ID “admin” without Password.

Be Sociable, Share!

Tags: , , ,

No Comments

(Required, will not be published)