Apr 16

Package Contents

Open the shipping carton of the DES-3028P Switch and carefully unpack its contents. The carton should contain the following items:

●One Stand-alone Switch

●One AC power cord

●This Manual on CD

●Mounting kit (two brackets and screws)

●Four rubber feet with adhesive backing

●DCE RS-232 console cable

If any item is missing or damaged, please contact your local D-Link Reseller for replacement.


Installation Preparation

The site where you install the D-Link Switch may greatly affect its performance. Please follow these guidelines for setting up the Switch.

●Install the Switch on a sturdy, level surface that can support at least 4.24kg (9.35lbs) of weight. Do not place heavy objects on the Switch.

●The power outlet should be within 1.82 meters (6 feet) of the Switch.

●Visually inspect the power cord and see that it is fully secured to the AC/DC power port.

●Make sure that there is proper heat dissipation from and adequate ventilation around the Switch. Leave at least 10 cm (4 inches) of space at the front and rear of the Switch for ventilation.

●Install the Switch in a fairly cool and dry place for the acceptable temperature and humidity operating ranges.

●Install the Switch in a site free from strong electromagnetic field generators (such as motors), vibration, dust, and direct exposure to sunlight.

●When installing the Switch on a level surface, attach the rubber feet to the bottom of the device. The rubber feet cushion the Switch, protect the casing from scratches and prevent it from scratching other surfaces.

Be Sociable, Share!

Tags: , ,

No Comments

(Required, will not be published)