Feb 05

Your D-Link DXS switch or DWS switch switch may be in Router Mode. To confirm this, please run the following command:

Step 1 From the console# command prompt, type show system mode.

Feature State
———- ———-
Mode: Router
Qos: Active

In this case if you check your switch’s interface you will not see default gateway.

From the console# command prompt, type show ip interface.

Proxy ARP is disabled

IP Address I/F Type Directed Broadcast
——————– ——————– ——————– ——————–

Step 2: To change to Switch mode please do the following (Please read all disclaimers carefully)

From the console# command prompt, type set system mode switch qos active.

Changing the switch working mode will *delete* the startup configuration file
and reset the device right after that. It is highly recommended that you will
backup it before changing the mode, continue ? (Y/N) Y
Startup file was deleted

Step 3: The system will reboot and come back in switch mode. Now will able to see default gateway option by doing the following.

User Name: admin
From the console# command prompt, type show system mode.

Feature State
———- ———-
Mode: Switch
Qos: Active

From the console# command prompt, type show ip interface.

Gateway IP Address Activity status Type IP Address I/F Type
—————————— —————————— —————————— —————————— ——————————
Be Sociable, Share!

No related posts.

Tags: , ,

No Comments


(Required)
(Required, will not be published)

css.php