Apr 19

This article will teach you set the D-Link router IPV6,DIR-632 as an example.

My IPv6 Connection: Select Link-Local Only from the drop-down menu.
LAN IPv6 Address Settings: Displays the IPv6 address of the router.

dlink-dir632-c

Static IPv6 (Stateful)

My IPv6 Connection:
WAN IPv6 Address
Settings:
LAN IPv6 Address:
LAN Link-Local Address:
Enable Autoconfiguration:
Autoconfiguration Type:
IPv6 Address Range Start:
IPv6 Address Range End:
IPv6 Address Lifetime:

My IPv6 Connection:Select Static IPv6 from the drop-down menu.

WAN IPv6 Address:Enter the address settings supplied by your Internet provider (ISP).

LAN IPv6 Address:Enter the LAN (local) IPv6 address for the router.

LAN Link-Local Address:Displays the Router’s LAN Link-Local Address.

Enable Autoconfiguration:Check to enable the Autoconfiguration feature.

Autoconfiguration Type:Select Stateful (DHCPv6) or Stateless. Refer to the next page for Stateless.

IPv6 Address Range Start:Enter the start IPv6 Address for the DHCPv6 range for your local computers.

IPv6 Address Range End:Enter the end IPv6 Address for the DHCPv6 range for your local computers.

IPv6 Address Lifetime:Enter the IPv6 Address Lifetime (in minutes).

dlink-dir632-d

DHCPv6 (Stateless)

dlink-dir632-f

Be Sociable, Share!

Tags: ,

No Comments


(Required)
(Required, will not be published)

css.php