Mar 18

Before You Begin Install the D-Link DWA-125 Wireless 150 Usb Adapter.

Before installing your new D-Link wireless adapter DWA-125, please verify the following:

• Remove any previous installations of wireless adapters
• Disable any built-in wireless adapters
• Verify the settings such as the SSID and security settings of the network(s) you want to connect to If you’ve installed a different manufacturer’s adapter or a different model

D-Link USB adapter, make sure the software is uninstalled before installing the new software. Some utilities may cause a conflict with the new software. If you plan to use multiple adapters at different times, make sure the utilities are not set to load when your computer boots up. Windows® XP/Vista™ users may use the built-in wireless utility for all adapters.

Warning: Do NOT install the DWA-125 USB Adapter into your computer before installing the driver software from the D-Link CD.

Step 1:

Turn on the computer and insert the D-Link DWA-125 Driver CD in the CD-ROM drive. If the CD Autorun function does not automatically start on your computer, go to Start > Run. In the run box type “D:\DWA125.exe” (where D: represents the drive letter of your CD-ROM drive).


Step 2:

When the autorun screen appears, click Install Drivers and follow the on-screen instructions to install and configure your wireless adapter.

Step 3:

After installation, the D-Link DWA-125 uses the Wireless Connection Manager as the management software. The manager provides the user an easy interface to change any settings related to the wireless adapter. Clicking on the Wireless Connection Manager icon on the desktop will start the Configuration.

Be Sociable, Share!

Tags: , , ,

No Comments

(Required, will not be published)