Access Point Mode
The DWL-2100AP is set to Access Point (AP) mode by default, which allows the DWL-2100AP to connect to wireless clients.
Step 1: Using an Ethernet cable connect the DWL-2100AP to your PC.
Step 2: Your computer will need to be in the same IP address range of the DWL-2100AP for configuration. The default IP address of the DWL-2100AP is 192.168.0.50.
Step 3: Open a web browser and type the IP address of the DWL-2100AP in the address bar (default is 192.168.0.50). Press Enter.
Step 4: The default username is admin (all lower case) and the default password is blank (nothing). Click OK.
Step 5: Select the Advanced tab and the Mode button.
Step 6: Select Access Point using the radio buttons.
Step 7: Click Apply and then click Continue to save new settings.
Point-to-Point Bridge
As a wireless bridge the DWL-2100AP allows you to connect two wireless LANs together.
Step 1: Log into the Access Point or Wireless Router that the D-Link DWL-2100AP is going to bridge and write down the Ethernet MAC Address or LAN Mac Address.
Step 2: Using an Ethernet cable connect the DWL-2100AP to your PC.
Step 3: Your computer will need to be in the same IP address range of the DWL-2100AP for configuration. The default IP address of the DWL-2100AP is 192.168.0.50.
Step 4: Open a web browser and type the IP address of the DWL-2100AP in the address bar (default is 192.168.0.50). Press Enter.
Step 5: The default username is admin (all lower case) and the default password is blank (nothing). Click OK.
Step 6: Select the Advanced tab and the Mode button.
Step 7: Select PtP Bridge using the radio buttons.
Step 8: In the Remote AP MAC Address field enter the MAC Address you obtained in Step 1.
Step 9: Click Apply and then click Continue to save the new settings.
Tags: DWL-2100AP, Wireless
how do I set up a dwl2100ap peer to peer
how to block websites by the router dwl-2100AP ?
please help me about this.