Nov 14

MAC filters will allow you to allow/deny access to wired and wireless clients based upon the clients MAC address.

Step 1 Open a web browser and type the IP address of the gaming router in the address bar (default is 192.168.0.1). Press Enter.

Step 2 The default password is blank (nothing). Click Log In.

A10439_image1

Step 3 Click Advanced at the top and then click MAC Address Filter on the left side.

Step 4 In the Filter Settings section select MAC Filter Enabled and configured the following:

  • Mode – Select only allow listed machines to only allow listed computers to connect to the gaming router or only deny listed machines to allow all computers to connect, except for those listed.
  • Filter Wireless Clients – (DGL-4300) Select this option to apply the MAC filter settings to the wireless interface.
  • Filter Wired Clients – (DGL-4300) Select this option to apply the MAC filter settings to the wired interface.

A10439_image2

Step 5 In the Add MAC Addresssection select Enabled and enter the MAC address of the computer, select it using the drop-down list to the right, or click Clone Your PC-¦s MAC Address to add the MAC address of the computer you are using.

A10439_image3

Step 6 Click Save to save the new settings.

Be Sociable, Share!

Tags: ,

No Comments


(Required)
(Required, will not be published)

css.php