Apr 01

This FAQ is for the D-Link DWL-2100AP and DWL-7100AP access points.

Step 1: Open a web browser and type the IP address of the access point in the address bar (default is 192.168.0.50). Press Enter.

Step 2: The default username is admin (all lower case) and the default password is blank (nothing). Click OK.

Step 3: Click the Advanced tab and then click DHCP Server.

Step 4: Click Static Pool Settings.

dwl-2100-1

Step 5: By default this feature is disabled. To enable it select Enabled from the drop-down list next to Function Disable/Enable.

Step 6: Enter the IP address that you want to assign to the device in the text box next to Assigned IP. Enter the device´s MAC address in the text box next to Assigned MAC Address. Also, input the Subnet Mask and Gateway. All other fields are optional.

Step 7: Click Apply and then click Continue to save the settings.

Be Sociable, Share!

Tags: , ,

2 Comments

  • At 2011.07.23 01:15, reasonableman said:

    What if i want to configure my AP through public IP provided by my ISP? In the above settings can I do like this?
    IP Assigned from: 192.168.0.1
    The Range of Pool(1-255): 20
    SubMask: 255.255.255.0
    Gateway: 203.130.x.x(Which is the public IP address of the AP which I had assigned to it previously in the LAN Setup)
    DNS: ( I dont know what to put here. Can I put the DNS Server address of my ISP which is 203.130.x.y)

    ??

    Please help…
    Regards

    • At 2013.01.07 09:30, Order Young Skin said:

      Does your site have a contact page? I’m having problems locating it but, I’d like to send you an
      email. I’ve got some creative ideas for your blog you might be interested in hearing. Either way, great site and I look forward to seeing it improve over time.


      (Required)
      (Required, will not be published)

      css.php