This article teaches you to set the vlans of D-Link DAP Series AirPremier N Dual Band PoE Access Point.
Step 1: Please log in to the unit by visiting it´s IP address in your web browser and logging in with your username and password.
The default values are below:
URL: http://192.168.0.50
Username: admin
Password: (blank)
Step 2: Choose Advanced Settings -> VLAN on the left hand menu.
Step 3: Select Enable under VLAN Status and then hit the Save Button.
Step 4: Click the Trash Can Icon next to the default VLAN to delete the default VLAN.
Step 5: Now we are going to add our VLANs to this AP. We will begin with a default VLAN and then add one or more additional VLANs.
Step 6: Choose the Add/Edit VLAN Tab and click the Save Button when you are finished adding a VLAN.
For our default VLAN we are going to use the below parameters:
Name: 1
VID: 1
Mgmt: Untag
LAN: Untag
Primary: Untag
S-1: Not Member
S-2: Not Member
S-3: Not Member
S-4: Not Member
S-5: Not Member
S-6: Not Member
S-7: Not Member
W-1: Untag
W-2: Untag
W-3: Untag
W-4: Untag
W-5: Untag
W-6: Untag
W-7: Untag
W-8: Untag
Step 8: Select the PVID Settings Tab and ensure that PVID Auto Assign Status is Enabled and then hit the Save Buttons.
Step 9: Choose The Configuration Button and then Save and Activate on the Top Menu.
Tags: Access Point, DAP, vlan
What kind of guide is this?
The title says it should show how to configure vlans. The example is just to configure the defalut vlan. It’s completely useless !!!!!
From the first sentence I thought this may have been just what I was looking for to explain what the settings actually mean as I’m trying to setup a guest SSID with VLAN, but it’s no better than the user guide that doesn’t explain it either.
This was more helpful:
http://www.dlink.cc/d-link-wireless/how-to-setup-multi-ssid-to-assign-vlans.html