D-Link Blog Home

Step 1: Open your web browser such as Internet Explorer and enter the IP address of the D-Link DWL-7100AP access point in the Address bar and press Enter. The default IP address is 192.168.0.50.

Step 2: Enter your user name (admin) and your password (leave blank by default). Click OK.

Step 3: Click the Advanced tab and then click Grouping on the left side.

Step 4: Next to Load Balance, select Enabled from the drop-down box.

When you Enable Load Balance you allow several D-Link DWL-7100AP/DWL-7000AP access points to balance wireless network traffic and wireless clients among the access points with the same SSID. All the APs that share Load Balancing must have the same SSID. Assign each Access Point a different non-overlapping channel (e.g., 1, 6, 11).

Step 5: Next to Link Integrate, select Enable from the drop-down box.

When Link Integrate is Enabled, the wireless segment associated with the AP will be disconnected whenever the connection between the AP and the LAN is dropped.

Step 6: Click Apply and then click Continue to save your settings.

Be Sociable, Share!

• 
• 

Tags: DWL-7100AP, Grouping Settings