Dec 19

If you have a UPS that you would like to use with the D-Link NVR, you may connect it before powering the unit on.

Step 1: Connect the USB cable from the UPS to the port on the back of the NVR.

Step 2: Connect the power cable to the UPS. (Ensure that the UPS is plugged in and receiving power).

Note: To turn off the NVR, simply push the power button for 5 seconds. The power LED will blink and the NVR will turn off after a moment.

Step 3: Attach the external power supply to the DC power receptacle located on the NVR’s rear panel (labeled DC12V) and connect the other end to an AC power outlet.


Be Sociable, Share!

Tags: , ,

No Comments

(Required, will not be published)