Oct 29

Step 1: Click the Site Setup button.

Step 2: Input the unit name.

Step 3: Input the IP address.

Step 4: Modify the port if necessary.

Step 5: Input the user name.

Step 6: Input the password.

Step 7: Check the Save Password/ Auto Login option (optional).

Step 8: Click the Test Server button to test the connection between the local application and the remote unit.

Step 9: Click the Add button to add this unit into your remote server list.

Step 10: Click the OK button.


Note: If using the Multi-NVR program remotely be sure to open port 5150 in your routers firewall for the DNS-726-4. This can be done by creating either port forwarding or virtual server rule.

Set Groups for Cameras

Step 1: Click the Group. tab

Step 2: Log in to all the servers that contain the camera(s) you would like to put into group(s).

Step 3: Click the Insert button to create a new group.

Step 4: Name this group.

Step 5: Highlight the camera(s) that you would like to add into this group and then click the button.

Step 6: Repeat step 4 to establish the group.

Step 7: Repeat step 1 through 6 to establish other groups.

Step 8: Click the OK button.


Delete/Rename Groups for Cameras

Step 1: Click the Site Setup button.

Step 2: Click the Group tab.

Step 3: Click the group which you would like to modify.

Step 4: Click the Delete or Rename button to remove or rename that group.

Step 5: Repeat step 2 through 3 to modify other groups.

Step 6: Click the OK button.

Setup Remote Live View through Application

Step 1: Click the unit you wish to access in your remote server list.

Step 2: Click the Log In button to access your unit.

Step 3: Select the camera(s) from the camera list on the right, and then drag it to where you wish the image to be displayed.

Be Sociable, Share!

Tags: ,

No Comments

(Required, will not be published)