Dec 04

Step 1: Open a web browser and type the IP address of the firewall into the address bar (default is Press Enter.

Step 2: The default username is admin (all lower case) and the password is admin (all lower case). Click on OK.

Step 3: Click on the plus sign next to Objects and then select Application Layer Gateways.


Step 4: Select http-outbound, click on Add, and then select HTTP ALG URL.


Step 5: Create the Content Filtering list as followed:

  • Action: Blacklist
  • URL: Key in desired filter URL in the format of Asterisk,dot,, forward slash, asterisk (** in this example)

Click on OK.


Step 6: Click on the plus sign next to Rules, select IP Rules, click on Add, and then select IP Rule Folder.

  • Name: name the folder as desired

Click on OK.


Step 7: Click on Add and select IP Rule and configure as followed:

  • Name: name as desired
  • Action: NAT
  • Service: http-outbound
  • Schedule: None
  • Source Interface: lan
  • Source Network: lannet
  • Destination Interface: wan
  • Destination Network: all-nets

Click on OK.


Step 8: Click on the Configuration tab and select Save and Activate from the dropdown menu. Click on OK to activate and save your changes.


Be Sociable, Share!

Tags: , ,

No Comments

(Required, will not be published)