Mar 07

Step 1: Log into the ShareCenter and go to the Advanced (Tools tab for the ShareCenter and dns-321) tab click RAID on the left side of the screen.


Note: Auto-rebuild should not be selected or the manual rebuild option will not be available.

Step 2: Click Manually Rebuild Now and the drives will begin to synchronize.


Step 3: Click the Status tab and verify the Sync Time Remaining. Once the Sync Time Remaining is Completed the RAID is now in sync.


Note: If sync time turns returns to 0 minutes and has a message Sync Time Remaining: Degraded still. You can perform a Disk Diagnostic to determine which drive is failing. To do this go to the Maintenance tab and click the Disk Diagnostic tab on the left hand side. Next select your drive(s) you wish to test and click Start.


Note: You can configure e-mail alerts to alert you when rebuilding is complete or the status becomes degraded.


Be Sociable, Share!

Tags: , ,

1 Comment

  • At 2013.07.09 11:30, tarot gratis said:

    I know this if off topic but I’m looking into starting my own weblog and was curious what all is required to get set up? I’m
    assuming having a blog like yours would
    cost a pretty penny? I’m not very internet smart so I’m not 100% certain.
    Any suggestions or advice would be greatly appreciated.
    Thank you

    (Required, will not be published)