Dec 30

Step 1: Move the toggle switch on the DIR-505-á to Router/AP mode and power on the device.

DIR-505-switch-moden1

Step 2: Run the setup wizard in the DIR-505’s Web Interface to select whether you want to use Router or Access Point (AP) mode.

DIR-505-switch-moden2 DIR-505-switch-moden3

Tags: , ,

Apr 27

To change or obtain an IP address automatically for the D-Link DWL-7100AP follow the steps below:

Step 1: Open your web browser and type the IP address of the access point in the address bar. The default IP address is 192.168.0.50. At the login, enter your username (admin) and password (default password is blank).

Step 2: Click on the Home tab and then click LAN.

Step 3: Select Dynamic (DHCP) from the drop-down list if you want the access point to receive an IP address automatically from a DHCP server or router, otherwise change the IP address manually (static).

We strongly suggest using a static IP address. The IP address is not used for networking, only for configuration. Make sure the IP address is within the same IP range as your network.

Step 4: Click the Apply button and click Continue to restart the access point.

Tags: , ,

Apr 04

Quality of Service (QoS) enhances the experience of using a network by prioritizing the traffic of different applications. A QoS Rule identifies a specific message flow and assigns a priority to that flow. For most applications, the priority classifiers ensure the right priorities and specific QoS Rules are not required. QoS supports overlaps between rules. If more than one rule matches a specific message flow, the rule with the highest priority will be used.

QoS (Quality of Service):

Enable this option if you want to allow QoS to prioritize your traffic Priority Classifiers.

HTTP:

Allows the D-Link DAP-2553 access point to recognize HTTP transfers for many common audio and video streams and prioritize them above other traffic. Such streams are frequently used by digital media players.

Automatic:

When enabled, this option causes the access point to automatically attempt to prioritize traffic streams that it does not otherwise recognize, based on the behavior that the streams exhibit. This acts to de-prioritize streams that exhibit bulk transfer characteristics, such as file transfers, while leaving interactive traffic, such as gaming or VoIP, running at a normal priority.

dap-2553-QOS

Name: Enter a name for the new QoS rule in the field provided.

Priority: Use the drop-down menu to select the desired priority: Background (BK), Best Effort (BE), Video (VI), or Voice (VO).

Protocol: Use the drop-down menu to choose the appropriate protocol used by the messages: Any, TCP, UDP, Both, IMCP, or Other.

Host 1 IP Range: The rule applies to a flow of messages for which one computer’s IP address falls within the range set here.

Host 1 Port Range: The rule applies to a flow of messages for which host 1’s port number is within the range set here when the Protocol is set to TCP, UDP, or Both.

Host 2 IP Range: The rule applies to a flow of messages for which the other computer’s IP address falls within the range set here.

Host 2 Port Range: The rule applies to a flow of messages for which host 2’s port number is within the range set here when the Protocol is set to TCP, UDP, or Both.

Tags: , ,

Aug 03

The D-Link DWL-G730AP has a built-in DHCP server. The DHCP server will automatically assign an IP address to the computers on the LAN/private network. Be sure to set your computers to be DHCP clients by setting their TCP/IP settings to Obtain An IP Address Automatically. Your computer will then pull an IP address automatically from the D-Link DWL-G730AP.

1.Access Point Mode

Step 1: Open a web browser and type the IP address of the D-Link DWL-G730AP in the address bar (default is 192.168.0.30). Press Enter.

Step 2: The default username is admin (all lower case) and the default password is blank (nothing). Click OK.

Step 3: Click the Home tab and then click DHCP.

dlink-dwlg730ap-dhcp-1

Step 4: By default DHCP server is disabled. Select Enabled using the radio buttons to use the D-Link DWL-G730AP as a DHCP server. If enabled, enter the starting and ending IP address and select a lease time using the drop-down list next to Lease Time.

dlink-dwlg730ap-dhcp-2

Starting IP Address – The first IP address in the range that can be assigned to a device on the network.

Ending IP Address – The last IP address in the range that can be assigned to a device on the network.

Lease Time – The length of time that the DHCP function of the D-Link DWL-G730AP will automatically regenerate the IP addresses to the devices on the network.

dlink-dwlg730ap-dhcp-3

Step 5:Click Apply and then click Continue to save the new settings.

Note: Clients on the network that are receiving dynamic IP addresses will be listed in the DHCP Client Table.

2.Router Mode

Step 1: Open a web browser and type the IP address of the DWL-G730AP in the address bar (default is 192.168.0.30). Press Enter.

Step 2: The default username is admin and the default password is blank (nothing). Click OK.

Step 3: Click on the Home tab and then click DHCP.

Step 4: Configure the following settings:

DHCP Server – Using the radio buttons select Enabled to use the built-in DHCP server or Disabled to use another DHCP server on the network.
Starting IP Address – The starting IP address for the DHCP server´s assignment.
Ending IP Address – The ending IP address for the DHCP server´s IP assignment.
Lease Time – The length of time for the IP lease.

3.Static DHCP

Static DHCP is used to allow the DHCP server to assign static IP addresses via specific MAC addresses.

Static DHCP – Using the radio buttons select Enabled to enable Static DHCP or Disabled to disable it.
Name – Enter a name to identify the device.
IP – Enter the last digits of the IP address that you want to statically assign.
MAC Address – Enter the MAC address of the computer that will be assigned the static IP address.
DHCP Client – Use the drop down list to view clients currently connected to the DWL-G730AP. To copy the MAC address into the MAC address section above, select the device from the drop-down list and then click Clone.

Step 5: Click Apply to save the new settings.

Tags: , , ,

Apr 29

D-Link passed its SmartBeam entry Point, style amount D-Link  DAP-1525, pictured above, by method of the FCC today. This sleek equipment could be utilized like a conventional WiFi router, or like a wireless bridge to extend your wireless network. The equipment facilitates dual-band Wireless-N, and features six-element directional antennae and 4 gigabit Ethernet ports on its back.

dap-1525a

While this features is not especially unique, the design and design from the sensible Beam entry place is particular to turn heads. as opposed to common rectangular entry points, the sensible Beam entry place carries a cylindrical type and is also developed to stand vertically like a can of Pringles. nobody mentioned you cannot be trendy will eliminating WiFi lifeless zones.

The SmartBeam entry place could be released this Spring for $150.

Tags: ,



 
Prev 1 2 3 4 5 Next
css.php