Note: Before you insert the D-Link DWL-G510/G630, you must first install the drivers and D-Link Wireless Utility from the installation CD that comes with the adapter.
Step 1: Insert the installation CD that came with the DWL-G510/DWL-G630 into your CD-ROM drive. The setup program should be launched automatically.
Step 2: Click Install Driver.
Step 3: Please wait while the InstallShield® Wizard prepares for setup.
Step 4: When the Welcome to the InstallShield® Wizard for D-Link AirPlus G Wireless LAN Adapter screen appears click Next.
Step 5: By default setup will install to the default location: Local Disk:\Program Files\D-Link AirPlus G, where Local Disk represents the drive letter of your hard drive. To install to a different location click Browse and specify the location. Click Next.
Step 6: Setup will now install to the location specified in Step 5.
Step 7: When setup is complete select No, I will restart my computer manually and then click Finish.
Step 8: Shut down your computer. Once off, insert the DWL-G510 into an available PCI slot on your computer or the DWL-G630 into an available PCMCIA slot on your laptop and then power on your computer. Once booted to Windows, the drivers will install automatically.
Step 9: The two notifications below will popup in the system tray (the area by the clock in the lower right hand side of the screen):
Step 10: Next, the Found New Hardware Wizard window will appear. Select Install the software automatically (Recommended) using the radio buttons and then click Next.
Step 11: The Please wait while the wizard searches… window will appear.
Step 12: If the Device has not passes Windows™ logo testing window appears click Continue Anyway.
Step 13: The Please wait while the wizard installs the software window will appear.
Step 14: When the Completing the Found New Hardware Wizard window appears click Finish.
Tags: Adapter Driver, DWL-G510, DWL-G630