Feb 10

Step 1: Launch the SharePort Mobile App


Step 2: Click on File and select your file


Step 3: Click on the Favorite Icon to allow for offline viewing and click file to go back


Step 4: Click on Home


Step 5: Scroll over to Favorites and select your file


Step 6: Click on the   Icon to select the application to open the file


Tags: , ,

Oct 27
  • The D-Link Surveillance Add on Package provides:
  • Embedded NVR (network video recorder)
  • Supports real-time monitoring, recording and playback of surveillance video using select D-Link Network Cameras
  • Supports up to 4 D-Link network cameras
  • Supports DCS-930,DCS-930L,DCS-932,DCS-932L,DCS-1100,DCS-1100L,DCS-1130,DCS-1130L,DCS-5222L,DCS-5211L,DCS-5230,DCS-5230L,DCS-942L, DCS-2103,DCS-2210,DCS-2230 (using package v.2.00)
  • Step 1: Download the Surveillance center app from www.dlink.com
    Step 2: Log into your DNS-325 / DNS-345
  • A10621_image1
  • Step 3: Click on the Applications tab and then click Add-On ManagementA10621_image2A10621_image3

    Step 4: Browse to the Surveillance Center Package and click Apply


    Step 5: The Surveillance center app should now be visible, click on the Play button to Start the app.


    Step 6: Click on the Applications tab


    Step 7: Click on the Surveillance Center App icon and click Launch Interface



    Note: Depending on your cameras configuration, the cameras may automatically be added to the Surveillance Center.

    If not:

    Step 8: Click Setup on the left side and click Camera Setup


    Step 9: Click Run Wizard


    The Camera Setup Wizard Appears

    Click Next

    Select your camera(s) and click next
    Enter the settings for your camera(s)
    • Username
    • Password
    • Video Format

    Click Test camera to confirm settings are correct. You should be able to see a camera still.

    Setup desired recording schedule (optional)

    Setup Quota for each camera (optional)Click Finish


    Your Cameras are now added, click on Live Video on the left sideA10621_image16

    Your camera(s) should now be visible


Tags: ,

Oct 27

NOTE: You need to be running firmware version 1.03 or later

Step 1: Log into the setup page of the D-Link DNS-325

Step 2: Click on the Home tab and click on mydlink Cloud


Step 3: It will start to download the app and install it



Step 4: Click on the Application tab and then on mydlink Cloud


Step 5: Here you will need to create your account for the mydlink Cloud. Fill in the information and click on Create.



NOTE: To access this on your Iphone/Android device you will need to download the mydlink Cloud app from the respective app store.



Tags: , ,

Oct 14

Make sure your D-Link camera is turned on and receiving power. To set up your camera for the first time, make sure your smartphone or tablet is connected directly to the camera’s Wi-Fi network. The Wi-Fi network name should be [myBabyCam-XXXX], where XXXX is a unique 4-digit code (the last 4 digits of your camera’s MAC address – indicated in picture below). Then use the in-app wizard to directly configure the camera.

D-Link Cloud Camera DCS-5222L

If you still can’t find your camera, reset your camera by pressing the reset button on the base of the unit for 10 seconds while it is powered on.

Tags: , ,

Jun 29

1.Can multiple users access the devices?

Yes but will use the same login credentials (admin). D-Link is working on a multi-user guest account feature in a future release.


2.Will other devices work with D-Link Home Automation solution?

Our products are Wi-Fi based so they work with any home automation solution products that don’t require a hub. D-Link developed a comprehensive app that connects our smart plugs, motion sensors, cameras.


3.IFTT supported?

No, we’re evaluating this feature.


4.In the case of a break in, will the police be contacted?

D-Link offers a do-it-yourself solution that provides value to consumers. Using our mydlink cameras, users can remotely check on their homes when motion is detected.


5.Will D-Link devices work outside the US?

Your mydlink Wi-Fi devices will work outside the US as long as there is internet access (for the myHome app). Smart plug can be used without internet access (local mode).


6.Can you control the devices via a web browser?

No, it requires a mobile app to control and manage the devices. myHome app provides the capability to control devices remotely.


7.Does the myHome app support Windows Phones?

No, it doesn’t. myHome app only supports iOS and Android.


8.How can I change the notification sound?

Go to settings on your smartphone and follow the instructions.

Tags: , ,