Feb 26
• Make sure your camera is turned on and receiving power.
• If you are setting up a new camera, make sure your smartphone or tablet is connected to the camera’s Wi-Fi signal (not your wireless router).
• The Wi-Fi network name should be [myBabyCam-XXXX], where XXXX is a 4-digit code (the last 4 digits of your camera’s MAC address).
• The Wi-Fi network name and password is printed on a label on the bottom of your camera and on the back of this install guide.
• If you still can’t find your camera, reset your camera by pressing its reset button for 10 seconds (while it is powered on).

Tags: Baby Camera, mydlink
Nov 15
Step 1: Open your web browser and enter http://www.mydlink.com/

Step 2: Enter your mydlink ID (email) and password at the login screen and click Sign in.

Step 3: Select the camera and click on the Settings tab.

Step 4: Ensure that the Sound Detection checkbox is checked and click the icon.

Step 5: The graph shows the current volume in the device’s environment. Click and drag the blue tab to move the level bar and define a volume detection threshold for sound detection. Click Next to continue.

Step 6: Select the schedule then click Next.

Step 7: Click Finish to confirm motion detection settings.

Step 8: Click Save to save the current configuration.

Step 9: Click Yes to confirm saving changes.

Tags: Baby Camera, DCS-800L, mydlink
Feb 13
Note: After you have changed the camera’s Wi-Fi network, you will need to connect your smart phone/tablet to same Wi-Fi network in order to access the camera’s live feed.
Step 1: Launch the mydlink Baby app.

Step 2: Tap the camera which you want to change the Wi-Fi network for.

Step 3: Tap the settings icon in the top right-hand corner of the screen.

Step 4: Tap the arrow to expand the Wireless settings section

Step 5: Select the Wi-Fi network which you want to change to.


Step 6: Enter the password for the new Wi-Fi network. Click Connect.

Tags: Baby Camera, mydlink, Wi-Fi
Jan 07
Step 1: Log in to your mydlink account at http://www.mydlink.com

Step 2: Select your mydlink-enabled camera to view live video.

Disclaimer: Windows and Internet Explorer are registered trademarks of Microsoft Corporation in the United States and other countries. Mac, Safari, Bonjour, iPad, and iPhone are trademarks of Apple Inc., registered in the United States and other countries. Android is a trademark of Google Inc.
Tags: Baby Camera, mydlink, Web Portal
Jan 07
- Smartphone or tablet with iPhone/iPad: iOS 5.1.1 or higher; Android 4.01 or higher
- 802.11g/n Wi-Fi network (Wireless N network recommended for optimal performance)
- Internet access required for remote viewing
You are advised to check your mobile device operating system’s application store for the most up-to-date requirements for the mydlink™ Baby Camera app.
Tags: Baby Camera, mydlink