Jan 23

This FAQ will demonstrate how to set up port binding for secure http on D-Link DI-LB604 WAN port 1.

Step 1: Open a web browser and type the IP address of the DI-LB604 into the address bar (default is

Step 2: The default username is admin (all lower case) and the default password is blank (nothing). Click on OK.

Step 3: Click on the Tools tab at the top, then click on Misc on the lefthand side.

Step 4: Click on the Set Protocol & Port Binding button at the bottom of the page.


Step 5: Create Rule as Followed:

Source IP:
Dest. IP: Subnet
IP Address:
Subnet Mask:
Protocol: Both
Port Range: 443-443
Wan: Wan 1


Step 6: Click Apply

Tags: , ,