Mar 07

The D-Link Omna DSH-C310 camera will accept most microSD cards. We recommend that you use a microSD card which meets the following specifications:

  • microSD
  • microSDHC (High Capacity)
  • microSDXC (eXtended Capacity)
  • Up to 128GB
  • Speed class: Class 10 or higher

Tags: , ,

Dec 16

Step 1 Connect an Ethernet cable to the Ethernet port located on the back of the camera and connect it to a networking device such as a router or switch.


If you are connecting the D-Link DCS-3220G to a wireless network connect the antennas to the back of the unit.

Step 2 Attach the external power supply to the DC power input connector located on the back on the camera labeled 12V DC and connect the other end to a wall outlet.


When you have a proper connection, the LED will change from red to green. If you are directly connected to the camera via a crossover cable, the light may cycle on and off and your computer may show an intermittent loss of connectivity. This will stop once you have configured the camera from your computer.

Step 3 Use the Install Wizard to detect the camera.

Tags: ,

Nov 14

Step 1: Open a web browser and enter the IP address of your camera in the address bar (default is If you do not know the IP address of your camera, please refer to the section entitled “How do I find the IP address of my D-Link DCS-2330L and access the web-based user interface?” in this FAQ. Press Enter.


Step 2: The User Name for the administrator account is admin. Enter your administrator password in the Password field. If you have not changed this from the default, leave this field blank. Click OK.



Step 3: Click on Setup from the menu at the top of the page.



Step 4: Click Audio and Video from the menu at the left-hand side of the page.



Step 5: To enable the microphone, ensure the Audio in off checkbox is unchecked. You can adjust the gain for the audio in (microphone) using the drop-down menus on the right-hand side of the box.

Click Save Settings to save the current configuration.


Tags: , ,

Oct 05

Step 1: Connect your D-Link DCS-942L to your broadband router with an Ethernet cable

Step 2: Power on the DCS-942L

Step 3: Download and launch the install wizard for your camera from

Step 4: Go through install Wizard:

  • Step 1: Choose Language and Click Start
  • Step 2: Accept the Terms and Conditions and click Next
  • Step 3: Setup Camera
  • Step 4: Select your DCS-942L and enter a new password for it


  • Step 5: Select the connection type for the Camera. Wired (Ethernet) or Wireless
  • Step 6: Add the DCS-942L to your existing mydlink account or create a new one.
  • Step 7: Setup is complete, Click Finish


Step 5: Log into your mydlink account to view and manage your DCS-942L-


Tags: , ,

Sep 17

With tamper detection, the dlink camera is capable of detecting incidents such as redirection, blocking or de-focusing, or even spray paint.

To enable camera tampering detection:

Step 1: Log into the web-based configuration of the D-Link camera.

Step 2: Click on Setup icon on the top left corner.

Step 3: Go to Event Management -> Tamper Detection


Step 4: Check the box for Enable camera tampering detection.

Step 5: Enter the tamper trigger duration (10 sec. ~ 10 min.). The tamper alarm will be triggered only when the tampering factor (the difference between current frame and pre-saved background) exceeds the trigger threshold.

Step 6: Click Save button to save the new settings.

Tags: ,

Prev 1 2 3 4 5 6 Next