Sep 27

How to connect D-Link your router GO-RT-N300?

1.Unplug the power to your DSL or Cable modem.

GO-RT-N300-Configuration

2.Connect an Ethernet cable from the Internet port of the router to the Ethernet port on your DSL or Cable modem.

GO-RT-N300-Configuration1

3.Connect another Ethernet cable from the Ethernet port on your computer to one of the LAN ports on the router. You can also connect wirelessly to the router with your computer. Complete steps 4 and 5 before attempting to connect.

GO-RT-N300-Configuration2

4.Plug the power back into your DSL or cable modem. Please wait about one minute before continuing.

GO-RT-N300-Configuration4

5.Plug the power adapter into your router and connect to an available power outlet or surge protector. If the Power LED does not light up, press the Power button on the back of the router.If connecting wirelessly, open your wireless utility on your computer and connect to the router. The Wi-Fi network (SSID) is GO-RT-N300 with no password.

GO-RT-N300-Configuration5

6. 6 After the router has powered up, verify that the Power and Internet LEDs are both lit. Proceed with router configuration.

Tags: , ,

Nov 15

Step 1: Open a web browser and enter http://dlinkap.local in the address bar.

 

Step 2: Enter your Admin Password in the field provided. If you have not changed the password from the default setting, the password field is to be left blank. Click Log In.

A10896_image2

 

Step 3: Move the cursor to Management at the top right-hand corner of the screen, then click System from the drop-down menu.

 

A10896_image3

 

Step 4: To save the current configuration settings of your wireless router to a file, click the Save Configuration to File button. Depending on your browser, the file may be automatically saved to your ‘Downloads’ folder, or a ‘Save File’ or similar dialog box will appear, asking you where you wish to save the file.

 

A10896_image4

 

To load a previously saved configuration file, click Select File. Once you have located the configuration file (config_rpt.bin) on your hard drive, click OK. The name of the file will be displayed next to the Select Filebutton. Click Restore Configuration from File. A confirmation dialogue will appear, click OK to commence the loading of the configuration.

A10896_image5

 

Note: If you have upgraded or downgraded the firmware on your Wi-Fi Audio Extender, do not load configuration files that were saved using a previous firmware version. The load will not be successful, and can damage the unit.

Tags: ,

css.php